JVC KD-G120 Instructions - Page 9

ENGLISH Sound adjustments You can select a preset sound mode suitable to the music genre (C-EQ: custom equalizer). Preset values BAS TRE S.BS Indication (For) (bass) (treble) (super bass) USER (Flat sound) 00 00 OFF ROCK (Rock or disco music) +03 +01 ON CLASSIC (Classical music) +01 -02 OFF POPS (Light music) +04 +01 OFF HIP HOP (Funk or rap music) +02 00 ON JAZZ (Jazz music) +02 +03 OFF Adjusting the sound You can adjust the sound characteristics to your preference. Indication, [Range] S.BS*2 (super bass), [S.BS ON or S.BS OFF] [01 to 05]*5 Maintain the richness and fullness of the bass sound regardless of how low you set the volume. SUB. W (subwoofer), [00 to 08] Adjust the subwoofer output level when a subwoofer is connected. VOL (volume), [00 to 30 or 50*6] Adjust the volume. *2 When you adjust the bass, treble, or super bass the adjustment you have made is stored for the currently selected sound mode (C-EQ) including "USER." *3 If you are using a two-speaker system, set the fader level to "00." *4 This adjustment cannot affect the subwoofer output. *5 Range adjustment for super bass is adjustable only when it is set to "S.BS ON." *6 Depending on the amplifier gain control setting. (See page 10 for details.) General settings - PSM You can change PSM (Preferred Setting Mode) items listed in the table on page 10. 1 *1 Displayed only when "L/O MODE" is set to "WOOFER" (see page 10). Indication, [Range] BAS*2 (bass), [-06 to +06] Adjust the bass. TRE*2 (treble), [-06 to +06] Adjust the treble. FAD*3 (fader), [R06 to F06] Adjust the front and rear speaker balance. BAL*4 (balance), [L06 to R06] Adjust the left and right speaker balance. 2 Select a PSM item. 3 Adjust the PSM item selected. 4 Repeat steps 2 and 3 to adjust other PSM items if necessary. Then press SEL to finish the procedure. To be continued... 9