JVC KD HDR1 Instructions - Page 18
Scroll, Woofer, Ext In, Changer, Tag Disp, Tag On, Tag Off, Amp Gain, Low Pwr, High Pwr, Area Us, - hd radio cd receiver
UPC - 046838023019
View all JVC KD HDR1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Indications Selectable settings, [reference page] ENGLISH SCROLL*1 Scroll mode WOOFER Subwoofer cutoff frequency EXT IN*2 External input TAG DISP Tag display BEEP Key-touch tone AMP GAIN Amplifier gain control AREA Tuner channel interval S MODE Radio station search mode IF BAND Intermediate frequency band CS ON HD CS-A mode standby on HD Radio ONCE AUTO : [Initial]; Scrolls the information once. : Repeats scrolling (5-second intervals in between). OFF : Cancels. • Pressing DISP for more than one second can scroll the display regardless of the setting. LOW : Frequencies lower than 90 Hz are sent to the subwoofer. MID : [Initial]; Frequencies lower than 135 Hz are sent to the subwoofer. HIGH : Frequencies lower than 180 Hz are sent to the subwoofer. CHANGER : [Initial]; To use a JVC CD changer, [11], a JVC compatible satellite (SIRIUS/XM) tuner, [19], an Apple iPod or a JVC D. player, [22]. EXT IN : To use any other external component than the above, [24]. TAG ON : [Initial]; Shows the Tag information while playing MP3/ TAG OFF WMA tracks, [13]. : Cancels. ON : [Initial]; Activates the key-touch tone. OFF : Cancels. You can change the maximum volume level of this unit. LOW PWR : VOL 00 - VOL 30 (Select this if the maximum power of the speaker is less than 50 W to prevent them from HIGH PWR OFF damaging the speaker.) : [Initial]; VOL 00 - VOL 50 : Deactivates the built-in amplifier. AREA US : [Initial]; When using the unit in North/Central/South AREA SA America. AM/FM intervals are set to 10 kHz/200 kHz. : When using the unit in South American countries where FM interval is 100 kHz. AM interval is set to 10 kHz. AREA EU : When using the unit in any other areas. AM/FM intervals are set to 9 kHz/50 kHz (100 kHz during auto search). You can change radio station search mode operation using the 4 /¢ buttons. MANUAL : [Initial]; To search for a station manually-for Manual HD SEEK search, [9]. : To search for an HD Radio station only-for HD search, [9]. AUTO : [Initial]; Increases the tuner selectivity to reduce interference noises between the stations. (Stereo effect will be lost.) WIDE : Subject to the interference noises from adjacent stations, but sound quality will not be degraded. (Stereo effect will not be lost.) AUTO : Automatically activates "USER" for the CS-A mode when the CS-A mode is set to "OFF", and the unit receiving a radio broadcast encoded with CS II. OFF : [Initial]; Cancels. *1 Some characters or symbols will not be shown correctly (or will be blanked) on the display. *2 Displayed only when one of the following sources is selected-FM, AM, or DISC. 18