JVC KD PDR80 Instructions - Page 13
English, External Devices - turns off
UPC - 046838032943
View all JVC KD PDR80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
ENGLISH Registering using "Open" Preparation: Operate the device to turn on its Bluetooth function. 1 Select "BT-PHONE" or "BT-AUDIO." 3 Repeat steps 1 and 2 until you finish entering a PIN code. 4 Confirm the entry. "Open..." flashes on the display. 2 Select "New." 3 Enter setting menu. 4 Select "Open." 5 Enter a PIN (Personal Identification Number) code to the unit. • You can enter any number you like (1-digit to 16-digit number). [Initial: 0000] • To enter a PIN code less than 4-digit, firstly delete the initial PIN code (0000) by pressing number button 5 ( ). * Some devices have their own PIN code. Enter the specified PIN code to the unit. 1 Move to the next (or previous) number position. 6 Use the Bluetooth device to search and connect. On the device to be connected, enter the same PIN code you have just entered for this unit. "Connected (and device name)" appears on the display. Now connection is established and you can use the device through the unit. The device remains registered even after you disconnect the device. Use "Connect" (or activate "Auto Connect") to connect the same device from next time on. (See the following and page 32.) Connecting a device Perform steps 1 - 3 on the left column, then... 1 • Select "Search" to search for available devices. The unit searches and displays the list of the available devices. If no available device is detected, "Device Not Found" appears. • Select "Special" to connect a special device. The unit displays the list of the preset devices. 2 Select a device you want to connect. 2 Select a number or blank space. Continued on the next page EXTERNAL DEVICES 13