JVC KD-R300 Instructions - Page 25
English, Settings
UPC - 046838036446
View all JVC KD-R300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
AUDIO ENGLISH Category Menu items Selectable settings, [reference page] FADER*9 Fader R06 - F06 : Adjust the front and rear speaker output balance. [Initial: 00] BALANCE *10 Balance L06 - R06 : Adjust the left and right speaker output balance. [Initial: 00] LOUD Loudness • LOUD OFF • LOUD ON : Cancels. : Boost low and high frequencies to produce a well-balanced sound at a low volume level. VOL ADJUST Volume adjust VOL ADJ -05 - : Preset the volume adjustment level of each source (except VOL ADJ +05 FM), compared to the FM volume level. The volume level [Initial: VOL ADJ 00] will automatically increase or decrease when you change the source. • Before making an adjustment, select the source you want to adjust. • "VOL ADJ FIX" appears on the display if "FM" is selected as the source. L/O MODE • SUB.W Line output mode • REAR : Select if the REAR LINE OUT terminals are used for connecting a subwoofer (through an external amplifier). : Select if the REAR LINE OUT terminals are used for connecting the speakers (through an external amplifier). SUB.W FREQ*11 • LOW Subwoofer cutoff • MID frequency • HIGH : Frequencies lower than 72 Hz are sent to the subwoofer. : Frequencies lower than 111 Hz are sent to the subwoofer. : Frequencies lower than 157 Hz are sent to the subwoofer. SUB.W LEVEL*11 SUB.W 00 - SUB. : Adjust the subwoofer output level. Subwoofer level W 08 [Initial: SUB.W 04] BEEP • BEEP OFF Keypress tone • BEEP ON : Deactivates the keypress tone. : Activates the keypress tone. AMP GAIN*12 Amplifier gain control • LOW POWER • HIGH POWER : VOLUME 00 - VOLUME 30 (Select if the maximum power of each speaker is less than 50 W to prevent damaging the speaker.) : VOLUME 00 - VOLUME 50 *9 If you are using a two-speaker system, set the fader level to "00." *10 This adjustment will not affect the subwoofer output. *11 Displayed only when "L/O MODE" is set to "SUB.W." *12 The volume level automatically changes to "VOLUME 30" if you change to "LOW POWER" with the volume level set higher than "VOLUME 30." Continued on the next page SETTINGS 25