JVC KD-R730BT Instructions - Page 25

Menu operations Menu item USB *9 IPOD SWITCH *10 (iPod/iPhone control) AUDIOBOOKS *10 Selectable setting (Initial: [XX]) DRIVECHANGE: Selects to change the drive when a device with multiple drives is connected to the USB input terminal (front/rear). [HEAD MODE]/IPOD MODE/APP MODE: For settings, ' page 11. NORMAL/FASTER/SLOWER: Selects the playback speed of the Audiobooks sound file in your iPod/iPhone. Initial selection depends on your iPod/iPhone setting. PHONE *12 AUDIO APPLICATION BT AUDIO SW *13 DELETE PAIR P. BOOK WAIT CONNECT/DISCONNECT: Connects or disconnects the Bluetooth phone/ audio device. (' page 15) CONNECT/DISCONNECT: Connects or disconnects the application in the smart phone. (' page 16) Switches between "BT AUDIO" and "BT PANDORA". For settings, ' page 16. Copies up to 400 numbers from the phonebook memory of a connected phone to the unit via OPP. BLUETOOTH *11 SET PINCODE Changes the PIN code (1 to 6-digits). (Default PIN code: 0000) Turn the control dial to select a number, press  /  to move to the entry position. After entering the PIN code, press the control dial to confirm. AUTO CNNCT [ON]: Establishes connection automatically with the Bluetooth device when the unit is turned on. OFF: Cancels. INITIALIZE INFORMATION AM *15 YES: Initializes all the Bluetooth settings (including stored pairing, phonebook, and etc.). [NO]: Cancels. PH CNNT DEV/AU CNNT DEV/APP CNT DEV *14: Displays connected phone/audio/application device name. MY BT NAME: Displays the unit name (JVC Unit). MY ADDRESS: Shows address of USB Bluetooth Adapter. [ON]/OFF: Enables or disables "AM" in source selection. SRC SELECT EXT IN *15 EXT ON/[EXT OFF]: Enables or disables "EXT IN" in source selection. AUX IN *15 BT AUDIO *16 SOFT VER [AUX ON]/AUX OFF: Enables or disables "AUX IN" in source selection. [BT AU ON]/BT AU OFF: Enables or disables "BT AUDIO" in source selection. Displays the firmware version of the unit. *9 Displayed only when the source is "USB FRONT/USB REAR". *10 Displayed only when the source is "IPOD-FRONT/IPOD-REAR". *11 If the USB Bluetooth Adapter is not connected to the unit, "PLEASE CNNT BT ADAPTER" scrolls on the display. *12 will not be displayed if two Bluetooth phones are connected at the same time. *13 Displayed only when the source is "BT FRONT/BT REAR". *14 Displayed only when a Bluetooth phone/audio player/application is connected. *15 Displayed only when the unit is in any source other than the corresponding source "AM/EXT IN/AUX IN". *16 Displayed only when the USB Bluetooth Adapter (KS-UBT1) is attached and current source is not "BT FRONT/ BT REAR". ENGLISH‫ |ޓ‬25