JVC KD-X210 Instruction Manual - Page 14
Troubleshooting - wiring
View all JVC KD-X210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
TROUBLESHOOTING Symptom Remedy Sound cannot be heard. • Adjust the volume to the optimum level. • Check the cords and connections. "MISWIRING CHK WIRING THEN RESET UNIT" / "WARNING CHK WIRING THEN RESET UNIT" appears and no operations can be done. Check to be sure the terminals of the speaker wires are insulated properly, then reset the unit. If this does not solve the problem, consult your nearest service center. Source cannot be selected. Check the [SRC SELECT] setting. ( 4) Radio reception is poor. / Static • Connect the antenna firmly. noise while listening to the radio. • Pull the antenna out all the way. Correct characters are not displayed. This unit can only display uppercase letters, numbers, and a limited number of symbols. The unit can also display uppercase Cyrillic letters. ( 11) Playback order is not as intended. The playback order is determined by the file name (USB). Elapsed playing time is not correct. This depends on the recording process earlier. "NOT SUPPORT" appears and track skips. Check whether the track is a playable format. ( 11) "CANNOT PLAY" flashes and/ or connected device cannot be detected. • Check whether the connected device is compatible with this unit and ensure the files are in supported formats. ( 11) • Reattach the device. "READING" keeps flashing. • Do not use too many hierarchical levels and folders. • Reattach the USB device. The iPod/iPhone does not turn on • Check the connection between this unit and iPod/iPhone. or does not work. • Detach and reset the iPod/iPhone using hard reset. If you still have troubles, reset the unit. ( 3) 12