JVC KD-X230 Instruction Manual - Page 8

RADIO AUX Default: XX LOCAL SEEK ON: Searches only FM stations with good reception. ; OFF: Cancels. • Settings made are applicable only to the selected source/station. Once you change the source/station, you need to make the settings again. IF BAND AUTO: Increases the tuner selectivity to reduce interference noises from adjacent FM stations. (Stereo effect may be lost.) ; WIDE: Subjects to interference noises from adjacent FM stations, but sound quality will not be degraded and the stereo effect will remain. MONO ON: Improves the FM reception, but the stereo effect will be lost. ; OFF: Cancels. NEWS-STBY*2 ON: The unit will temporarily switch to News Programme if available. ; OFF: Cancels. REGIONAL*2 ON: Switches to another station only in the specific region using the "AF" control. ; OFF: Cancels. AF SET*2 ON: Automatically searches for another station broadcasting the same program in the same Radio Data System network with better reception when the current reception is poor. ; OFF: Cancels. TI SET*2 ON: Allows the unit to temporarily switch to Traffic Information if available ("TI" lights up). ; OFF: Cancels. PTY SEARCH*2 Select a PTY code (see below). If there is a station broadcasting a program of the same PTY code as you have selected, that station is tuned in. PTY code: NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED, POP M (music), ROCK M (music), EASY M (music), LIGHT M (music), CLASSICS, OTHER M (music), WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE IN, TRAVEL, LEISURE, JAZZ, COUNTRY, NATION M (music), OLDIES, FOLK M (music), DOCUMENT *2 Only for FM source. 6 Use a portable audio player 1 Connect a portable audio player (commercially available). 3.5 mm stereo mini plug with "L" shaped connector (commercially available) Auxiliary input jack Portable audio player 2 Select [ON] for [AUX] in [SRC SELECT]. ( 4) 3 Press repeatedly to select AUX. 4 Turn on the portable audio player and start playback. Use a 3-core plug head stereo mini plug for optimum audio output. Use a Bluetooth® device 1 Connect the Bluetooth adapter, KS-BTA100 (separately purchased). Blue/white Black Brown Wiring harness of the unit ( 15) Blue/white: Remote Black: Ground Brown: Tel muting Auxiliary input jack 2 Register (pair) the Bluetooth device with KS-BTA100. 3 Select [BT ADAPTER] for [AUX] in [SRC SELECT]. ( 4) 4 Press repeatedly to select BT AUDIO. 5 Start using the Bluetooth device. For details, refer to the instruction manual of KS-BTA100.