JVC KD-X260BT Quick Start Guide America - Page 13

BLUETOOTH® Depending on the operating system and the firmware version of your mobile phone, Bluetooth features may not work with this unit. Connect the microphone Connect the supplied microphone to the microphone input jack/terminal on the rear panel. Adjust the microphone angle Secure using cord clamps (not supplied) if necessary. Pair and connect a Bluetooth device for the first time 1 Press BSRC to turn on the unit. 2 Search and select the name of your receiver ("KD-X3 BTS"/ "KD-X2 BT"/"KD-SX2 BT" on the Bluetooth device. 3 Perform (A) or (B) depending on what appears on the display. For some Bluetooth devices, pairing sequence may vary from the steps described below. (A) "[Device Name]" "XXXXXX" "VOL - YES" "BACK - NO" "XXXXXX" is a 6-digit passkey randomly generated during each pairing. Ensure that the passkeys appear on the unit and Bluetooth device are the same. Press the volume knob to confirm the passkey. Operate the Bluetooth device to confirm the passkey. (B) "[Device Name]" "VOL - YES" "BACK - NO" Press the volume knob to start pairing. • If "PAIRING" "PIN 0000" scrolls on the display, enter the PIN code "0000" into the Bluetooth device. • If only "PAIRING" appears, operate the Bluetooth device to confirm pairing. "PAIRING COMPLETED" appears when pairing is completed and " " will light up when the Bluetooth connection is established. Answer a call Press or the volume knob. • To adjust the phone volume [00] to [35], turn the volume knob. • To end a call, press and hold or the volume knob. Audio player via Bluetooth 1 Press BSRC repeatedly to select BT AUDIO. • Pressing enters BT AUDIO directly. 2 Operate the audio player via Bluetooth to start playback. To Play back/pause Select group or folder Reverse skip/Forward skip Reverse/Fast-forward Repeat play Random play On the faceplate Press the volume knob. Press 2J / 1K. Press S / T. Press and hold S / T. Press 4B repeatedly. Press 3A repeatedly. 9