JVC KD-X360BTS Instruction Manual America - Page 30
Speaker output settings, Connection via lineout terminals, Connection via speaker leads
View all JVC KD-X360BTS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
AUDIO SETTINGS [SOUND EFFECT] [SPACE ENHANCE] (Not applicable for FM/AM source.) [SMALL]/[MEDIUM]/[LARGE]: Virtually enhances the sound space. ; [OFF]: Cancels. [SND RESPONSE] [LEVEL1]/[LEVEL2]/[LEVEL3]: Virtually makes the sound more realistic. ; [OFF]: Cancels. [SOUND LIFT] [LOW]/[MIDDLE]/[HIGH]: Virtually adjusts the sound position heard from the speakers. ; [OFF]: Cancels. [VOL LINK EQ] [ON]: Boosts the frequency to reduce the noise heard from outside the car or running noise of the tyres. ; [OFF]: Cancels. [K2 TECHNOLOGY] (Not applicable for FM/AM source, SIRIUS XM source and AUX source.) [ON]: Improves the sound quality of compressed music. ; [OFF]: Cancels. Speaker output settings [SPK/PRE OUT] (Applicable only if [X ' OVER TYPE] is set to [2-WAY]) (page 25) Select the output setting for the speakers [SPK/PRE OUT], based on the speaker connection method. Connection via lineout terminals For connections through an external amplifier. (Page 41) KD-X360BTS: Setting on [SPK/PRE OUT] Audio signal through lineout terminal FRONT REAR SW [REAR/REAR] (default) Front speakers output Rear speakers output Subwoofer output [REAR/SUB.W] ( Not available ) ( Not available ) ( Not available ) [SUB.W/SUB.W] Front speakers output L (left): Subwoofer output Subwoofer output R (right): (Mute) KD-X260BT/KD-SX25BT: Setting on [SPK/PRE OUT] Audio signal through lineout terminal REAR/SW [REAR/REAR] Rear speakers output [REAR/SUB.W] (default) Subwoofer output [SUB.W/SUB.W] Subwoofer output Connection via speaker leads You can also connect the speakers without using an external amplifier but still being able to enjoy the subwoofer output with these settings. (Page 40) Setting on [SPK/PRE OUT] [REAR/REAR] Audio signal through rear speaker lead L (left) R (right) Rear speakers output Rear speakers output [REAR/SUB.W] Rear speakers output Rear speakers output [SUB.W/SUB.W] Subwoofer output (Mute) If [SUB.W/SUB.W] is selected: - [120HZ] is selected in [SUBWOOFER LPF] and [THROUGH] is not available. (Page 28) - [POSITION R02] is selected in [FADER] and selectable range is [POSITION R15] to [POSITION 00]. (Page 25) 26 ENGLISH