JVC KDBT1 Instructions - Page 22
Adjusting the sound
UPC - 046838028328
View all JVC KDBT1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
ENGLISH 3 Adjust the quality slope (Q). Sound elements Range/selectable items BASS MID TRE Frequency 60 Hz 80 Hz 100 Hz 200 Hz 500 Hz 1.0 kHz 1.5 kHz 2.5 kHz 10.0 kHz 12.5 kHz 15.0 kHz 17.5 kHz Level (LVL) -06 to -06 to -06 to +06 +06 +06 Q Q1.0 Q0.5 Fix Q1.25 Q0.75 Q1.5 Q1.0 Q2.0 Q1.25 BASS: Bass MID: Mid-range TRE: Treble 5 Repeat steps 3 and 4 to adjust other sound tones. The adjustment made will be stored automatically. Adjusting the sound You can adjust the sound characteristics to your preference. 1 2 FADER *2 Adjust the front and rear speaker balance. R06 to F06 BALANCE *3 Adjust the left and right speaker balance. L06 to R06 LOUD*4 (loudness) Boost low and high frequencies to produce a well-balanced sound at a low volume level. LOUD ON or LOUD OFF SUB.W*1 (subwoofer) Adjust the subwoofer output level. 00 to 08, initial: 04 VOL ADJ (volume adjust) -05 to +05, Adjust the volume level of each source initial: 00 (except FM), compared to the FM volume level. The volume level will automatically increase or decrease when you change the source. • Before making an adjustment, select the source you want to adjust. VOLUME Adjust the volume. 00 to 50 or 00 to 30*5 *1 Displayed only when "L/O MODE" is set to "SUB.W" (see page 24). *2 If you are using a two-speaker system, set the fader level to "00." *3 This adjustment will not affect the subwoofer output. *4 Loudness setting will be applied to all sound modes. *5 Depending on the amplifier gain control setting. (See page 25 for details.) 22