JVC KW-NT700 Instructions - Page 39
Checking the information of the navigation system, System Info, Sensor Status - gps antenna
View all JVC KW-NT700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
ENGLISH Checking the information of the navigation system System Info 1 Press 2 - . Sensor Status 1 Press 2 - . 1 4 9 2 5 p 3 6 q 7 w 8 1 Version of the software 2 Version of the map database 3 Serial number 4 Speed pulse rate 5 GPS antenna connection status : GPS antenna is detected (the figure shows the number of GPS satellites being received). : GPS antenna is not detected 6 Status of the gyroscope 7 Status of calibration*1 : The system has started learning calibration data. : Though learning is almost complete, the system is still learning to make the calibration data more accurate. 8 Resets the calibration data. Reset the data if you replace the tires or if the current position is displayed far from the actual position 9 Connection status of the illumination control lead : The illumination signal is detected. p Connection status of the parking brake lead : The parking brake is engaged. q Connection status of the reverse gear signal lead : Reverse gear signal is detected. • If the rear view screen is displayed when shifting the gear to the reverse (R) position, the reverse gear signal is detected (). w Information service being received (Traffic or Area information; only for KW-NT800HDT) *1 About calibration The calibration is a function conducted in order to display the current position more accurately using signals from GPS and the internal sensors. Even after calibration status changed to , the system will keep learning to make the current position more accurate. • The calibration does not function without the connection of GPS antenna and the speed signal lead. For the connection, ☞ Installation/Connection Manual (separate volume). • Driving under various conditions completes the calibration faster. If remains on the screen for a long period, check the connection of the GPS antenna and the speed signal lead. • While learning is going on, the current position may not be displayed correctly . 39