JVC KW-R500 Instructions - Page 14
Menu operations - car audio
View all JVC KW-R500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
MMeenunoupeorpateiornas tions 1 (Hold) If no operation is done for about 60 seconds, the operation will be canceled. 2 3 Repeat step 2 if necessary. To return to the previous menu, press . To exit from the menu, press DISP or MENU. DIMMER Menu item DEMO CLOCK COLOR COLOR SETUP DIMMER SET BRIGHTNESS SCROLL *2 TAG DISPLAY Selectable setting (Initial: [XX]) For settings, ' page 4. For settings, ' page 11. Selects the display and button illumination adjusted in the / setting. [AUTO]: Changes between the Day and Night adjustments when you turn off/on the car headlights. *1 ON: Selects the Night adjustments. OFF: Selects the Day adjustments. DAY[31]/NIGHT[15]: Brightness settings for the display and button illumination for day and night. BUTTON ZONE/DISP ZONE: Sets the brightness levels 00 - 31. [ONCE]: Scrolls the display information once. AUTO: Repeats scrolling (at 5-second intervals). OFF: Cancels. [ON]: Shows the TAG information while playing MP3/WMA tracks. OFF: Cancels. DISPLAY PRO EQ FADER *3*4 BALANCE *4 LOUD (Loudness) VOL ADJUST (Volume adjust) For settings, ' page 12. R06 - F06[00]: Adjusts the front and rear speaker output balance. L06 - R06[00]: Adjusts the left and right speaker output balance. ON: Boosts low and high frequencies to produce a well-balanced sound at a low volume level. [OFF]: Cancels. -05 - +05[00]: Presets the volume adjustment level of each source, compared to the FM volume level. Before adjustment, select the source you want to adjust. ("VOL ADJ FIX" appears if "FM" is selected.) AUDIO L/O MODE (Line output mode) Select if the LINE OUT (REAR) terminals on the rear panel are connected to the speakers or subwoofer through an external amplifier. SUB.W: Subwoofer [REAR]: Speakers *1 The illumination control lead connection is required. (See "Installation/Connection Manual".) This setting may not work correctly on some vehicles (particularly on those having a control dial for dimming). In this case, change the setting to other than . *2 Some characters or symbols will not be shown correctly (or will be blanked) on the display. *3 If you are using a two-speaker system, set the fader level to "00". *4 This adjustment will not affect the subwoofer output. 14 |ޓENGLISH