JVC LT-37X898 Instructions - Page 25

Quick Setup Auto Clock Set Before you use any of your TV's timer functions, you must first set the clock. You may precisely set your clock using the XDS time signal broadcast by most public analog broadcasting stations. If you do not have this in your area, you will have to set the clock manually. See manual clock set below. To set the clock using the XDS signal: SET CLOCK √® † To choose AUTO To TIME ZONE MODE TIME TIME ZONE D.S.T. AUTO √® To select your time zone: (Atlantic, Eastern, -- : -- -- Central, Mountain, Pacific, Alaska or Hawaii) ATLANTIC ON † √® To move to D.S.T. (Daylight Savings Time) To turn D.S.T. ON or OFF NEXT † To NEXT (To Auto Tuner Setup) SELECT OPERATE MENU EXIT Notes: • D.S.T. can be used when it is set to ON in the SET CLOCK menu. • Only when the MODE is set to AUTO, the Daylight Saving Time feature automatically adjusts your TV's clock for Daylight Saving. • The real time and D.S.T. may not be set correctly depending on the broadcasting signal and receiving conditions. In this case, set your clock manually and turn D.S.T. to OFF. • You will have to reset the clock after a power interruption. You must set the clock before operating any timer functions. Manual Clock Set To set your clock manually (without using the XDS signal), choose MANUAL. If you choose AUTO, see auto clock set above. SET CLOCK MODE TIME TIME ZONE D.S.T. SELECT MANUAL -- : -- -ATLANTIC ON START CLOCK OPERATE MENU EXIT √® † √® † √® † √® † √® † To choose MANUAL To TIME To set the hour To minute To set the minute To TIME ZONE To select your time zone: (Atlantic, Eastern, Central, Mountain, Pacific, Alaska or Hawaii) To move to D.S.T. (Daylight Savings Time) To turn D.S.T. ON or OFF To START CLOCK Note: • You will have to reset the clock after a power interruption. You must set the clock before operating any timer functions. (Continued...) 25