JVC NXPS1 Instructions - Page 26

Specifications Amplifier Output Power Main Speaker Subwoofer 10 W per channel, min. RMS, driven into 6Ω at 1kHz, with no more than 10% total harmonic distortion 30W, min. RMS, driven into 8Ω at 100Hz, with no more than 10% total harmonic distortion Terminals Input Sensitivity/Impedance (1 kHz) AUX IN LEVEL1 500 mV/47 kΩ LEVEL2 125 mV/47 kΩ USB AUDIO Ver. 1.1 USB MEMORY Ver. 1.1 Compatible device Mass Storage Class Compatible file system FAT16, FAT32 Bus power supply Max. 5V/500 mA iPod Compatible iPod types See page 13 Bus power supply Max. 5V/500 mA Speaker terminals Main speaker 6Ω-16Ω Subwoofer 8Ω-16Ω PHONES 32Ω - 1 kΩ 15 mW/ch output into 32Ω Unit Dimensions Mass 90mm × 96mm × 137mm (W/H/D) Approx. 0.5kg Speaker Specifications Main speaker SP-NXPS1F (each unit) Type Full range bass-reflex type Speaker Unit 7.5 cm cone × 1 Power handling Capacity 10 W Impedance 6Ω Frequency Range 150 Hz - 20 kHz Sound pressure level 83 dB/W • m Dimensions Mass 90mm × 96mm × ×90mm (W/H/D) Approx. 0.63kg Subwoofer SP-NXPS1W Type Bass Reflex Type Speaker Unit 16 cm cone × 1 Power handling Capacity 30 W Impedance 8Ω Frequency Range 35 Hz - 150Hz Sound pressure level 80 dB/W • m Dimensions 221mm × 221mm × 222mm (W/H/D) Mass Approx. 3.5kg Accessories See page 3 Power Specifications NX-PS1 (System) Power Requirements AC 110V-240V 50Hz/60Hz Power Consumption 19 W (power on mode) 12 W (in Standby mode) 1 W (in ECO mode) AC Adaptor (AA-R2401) INPUT AC 110V-240V 50Hz/60Hz 1.5A OUTPUT DC 23V 2.5A, 57.5VA CA-NXPS1 (Main Unit) Power Requirements DC IN 23V 2.5A Design and specifications are subject to change without notice. 21