JVC SR-DVM600US Instructions - Page 48
Dubbing From DV To DVD (Dubbing A Part Of A Cassette
UPC - 046838027215
View all JVC SR-DVM600US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
48 EN EDITING Dubbing From DV To DVD (Dubbing A Part Of A Cassette) It is possible to select the images on the DV cassette to be dubbed from the DV deck to the DVD deck using AMANUALB dubbing. 1 Load the Mini DV cassette you want to dub. Make sure its erase protection switch is set to ASAVEB. ● Set ADV AUDIO RECB to the appropriate mode. (A pg. 60) 2 Press DUBBING to access the Dubbing Menu screen. 3 Press selection keys to select ADVNDVDB, then press ENTER. 4 Select AMANUALB, then press ENTER. 5 Press selection keys to select ASELECT RECORDING MODEB, then press ENTER. Press selection keys to select the desired option, then press ENTER. 6 Press selection keys to select ASELECT SOUND MODEB, then press ENTER. Press selection keys to select the desired option, then press ENTER. 7 Press G to select ACONFIRMB, then press ENTER. The confirmation screen appears. 8 Press selection keys to select AEXECUTEB or AAUTO FINALIZEB, then press ENTER for confirmation. ● If the DV deck is in the stop mode, the unit will start dubbing from the current tape position. ● If the DV deck is in the pause mode, the unit will start dubbing from the point where the tape was paused after automatically rewinding the tape for 2 seconds. ● To cancel the dubbing, press o then selection keys to select ACANCELB and press ENTER to confirm. 9 Upon completing dubbing, the tape stops and ADUBBING COMPLETEDB appears on the TV screen. Press ENTER to end. ● The tape will automatically be rewound. NOTES: ● The program information at the DV deck will not be dubbed. ● When there are blanks on the tape of more than 2 seconds, the DVD deck will enter into pause mode while playback on DV deck continues. This also applies to portions of the DV tape that are damaged or unreadable. The last image is displayed on the TV screen. Dubbing will resume once recorded portion is detected. If the blank portion continues until the end of the tape, ADUBBING COMPLETEDB appears on the TV screen when the tape end is reached and the tape rewinds automatically. ● Dubbing copyright guarded tape is not possible. ● When dubbing is in progress, o and ON SCREEN buttons are functional. About Disc Remaining Display When dubbing from HDD to DVD, the unit displays the time information for dubbing by bar meter. By comparing the disc remaining time and the necessary time for dubbing of the selected items, it is possible to check if the dubbing can be performed completely or not. When performing the High Speed Dubbing Capacity of a disc Remaining capacity Dark green: Length of already recorded item Light green: Length of selected item Yellow: Length of the item now being selected by arrow Red: Excess over the capacity 21% When performing the Just Dubbing TOTAL 105MIN ● The unit displays the status on the assumption that the selected items are dubbed in the lowest transfer rate. ● The total time of a loaded disc is displayed on the right of the bar meter. When performing the Manual Dubbing MAX FR240 ● The unit displays the status on the assumption that the selected items are dubbed in the lowest transfer rate. ● The available highest transfer rate is displayed on the right of the bar meter.