JVC SR-HD1350US Instruction Manual - Page 90
Network Setting (only For Sr-hd1700), Component Output, Video Input Setting, Ip Address Setting
View all JVC SR-HD1350US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Settings Menu Setting Menu List (Continued) m COMPONENT OUTPUT For setting the resolution of video output from the [COMPONENT VIDEO OUT] terminal. Setting Values Description 480i (NTSC) 576i (PAL) Sets output to "480i" or "576i". 480p (NTSC) 576p (PAL) Sets output to "480p" or "576p". 720p Sets output to "720p". 1080i Sets output to "1080i". Memo: v When the resolution is set to "720p", videos are output at "1080i" other than those recorded at "720p" even though "720p" is shown on the display. v This unit does not support component output at "1080p". To output at "1080p", do so via HDMI connection. v If "VIDEO PRIORITY MODE" is set to "HDMI", the unit will output at "480i" or "576i" regardless of the current setting. v If "VIDEO PRIORITY MODE" is set to "COMPONENT", or when an HDMI connection is used, DVD videos and BDMV will be output at "480p" or "576p" even if "720p" or "1080i" has been set. v The aspect ratio of video/S-video output changes according to the component output setting. As such, there may be cases where the aspect ratio of the video/S-video output is different from the predefined setting of the content. m VIDEO INPUT SETTING Choose a setting according to the video terminal to be connected when an external analog input terminal is used. Setting Values Description VIDEO Use this setting when connecting via the video (BNC) terminal. S-VIDEO Use this setting when connecting via the S-video (black) terminal. m HDCP For setting the output of copyright-free contents to devices that do not support HDCP. Setting Values Description FIXED Encrypts copyright-free contents during playback. AUTO Does not encrypt copyright-free contents during playback. Memo: v If "HDCP" is set to "AUTO" while a device incompatible with HDCP is used, images may appear distorted. Operate as follows if the images are distorted. Press and hold the "0" button on the remote control for 5 seconds to set HDCP to "AUTO". NETWORK SETTING (only for SR-HD1700) 0'6914-5'66+0) +2#&&4'555'66+0) +2#&&4'55 57$0'6/#5&'(#7.6)#6'9#; /#%#&&4'55 %10(+4/ &*%2 ':+6 5'672 5'.'%6 14'6740 . For specifying settings related to the LAN terminal. m IP ADDRESS SETTING For setting whether to obtain the IP address using "DHCP" or to enter it manually using "MANUAL". Setting Values Description DHCP Obtains information from the DHCP server each time the unit starts up. MANUAL For entering the IP address manually. Memo: v Upon setting to DHCP, "IP ADDRESS", "SUBNET MASK", and "DEFAULT GATEWAY" are grayed out, and input is disabled. m IP ADDRESS For setting the IP address. m SUBNET MASK For setting the subnet mask. m DEFAULT GATEWAY For setting the default gateway. m MAC ADDRESS Displays the MAC address. m CONFIRM Confirms the network settings that are currently displayed. Memo: v The settings are not applied until the confirmation items are selected. v The default values when "IP ADDRESS SETTING" is set to "MANUAL" are as follows. IP ADDRESS : 192.168.100.100 SUBNET MASK : 255.255.255.0 DEFAULT GATEWAY : 192.168.100.254 v Perform settings such that the same IP address is not used within the network environment. v For details, check with the person in charge of setting the network. 90