JVC SR-HD2500US Operation manual for the SR-HD2500US Blu-ray recorder (112 pa - Page 104
Troubleshooting
View all JVC SR-HD2500US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Others Troubleshooting Problem Symptom Action Reference Page Power does not turn on The "HELLO" message remains displayed, and the unit does not start up. Press the [RESET] button on the front panel. If it does not start up, stop using this unit, unplug the plug from the power point, and bring it to the dealer or "Service Center". (A page 13) "FAN LOCKED" is The cooling fan motor is not working. displayed on the display window of this unit The cooling fan motor is spoiled. Remove the power plug from the power point, and consult the dealer from which this product is purchased, or any nearby JVC Servicing Center. Power turns off automatically The "AUTO POWER (OFF)" setting is Change the "AUTO POWER (OFF)" set to "2 HOURS" or "6 HOURS". setting of "SETUP" to "OFF". (A page 78) The temperature of this unit has rose, Place this unit in an area with ventilation if - and operation has ceased for safety possible, and wait approximately 30 purposes. minutes for it to cool down. The power turns on automatically The "HDMI-CEC" setting is set to "ON". Change the "HDMI-CEC" setting of "CONNECTION" to "OFF". (A page 85) Input cannot be switched i.LINK connection is currently being established. Cancel importing, or wait until the connection ends. (A page 39) There are no video Monitor only supports RGB input. images on the monitor Set "HDMI --> DVI COLOR" in the setting (A page 84) menu to "RGB FIX". "HDCP ERROR" is displayed. Use a monitor that supports HDCP. - Video images may be distorted during reencoding/dubbing when the monitor (TV) is connected to this unit using a HDMI cable, or when the screen resolution is set to "1080p". This is not a malfunction. Change the "HDMI OUTPUT RESOLUTION" to a value other than "1080p" (e.g., 1080i) if you find it annoying. (A page 84) Screen is distorted Video images may be distorted during reencoding/dubbing when the monitor (TV) is connected to this unit using a HDMI cable, or when the screen resolution is set to "1080p". This is not a malfunction. Change the "HDMI OUTPUT RESOLUTION" to a value other than "1080p" (e.g., 1080i) if you find it annoying. (A page 26) There is no audio sound The "HDMI AUDIO OUTPUT" setting Change the "HDMI AUDIO OUTPUT" is set to "OFF". setting of "CONNECTION" to "ON". (A page 84) The amplifier does not support "BITSTREAM" output. Use an amplifier that supports bitstream output. (A page 82) Dubbing cannot be performed The title to be dubbed is copyright protected. Titles that are copyright-protected cannot be dubbed. Select a title that is not copyright-protected. (A page 25) A finalized disc has been inserted. Insert a disc that has not been finalized. - The disc is not formatted. Format the disc. (A page 27) The SD card is write-protected. Remove the SD card and remove the write (A page 29) protect lock. High-speed dubbing cannot be performed for EP mode titles Dubbing cannot be performed and "SOME TITLES CANNOT BE DUBBED" is displayed when trying to perform high-speed dubbing of a EP mode title to a DVD-VIDEO mode disc. Set "HIGH-SPEED DUBBING" in the settings menu to "4:3" before recording or importing in the EP mode. (A page 26) (A page 80) 104