JVC SR-V101US Instruction Manual - Page 14
Series Recording - instructions
View all JVC SR-V101US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
A Make connections Connect two sets of SR-V101US and a TV using AV cables as shown in the illustration. ● The mini-plug cable is a mono 3.5 mm mini-plug to mono 3.5 mm mini-plug connector. ● When playing back S-VHS recordings, it is recommended to use the S-VIDEO connection to minimize picture degradation. B Turn on all components After completing the connections, turn on all the components. ● Set the TV to video input mode or A/V input mode. Refer to the TV instruction manual. C Load cassettes Insert the playback cassette into each SR-V101US. Set SR-V101US-2 to "AUX". Press CH + or - to select the input mode depending on the connector being used: ● "L-1" for the rear AUDIO/VIDEO IN connector, or ● "F-1" for the front AUDIO/VIDEO input connector. D Start playback ● Press PLAY ( 4) on either of SR-V101US. When the playback reaches to the returning point (tape end or recording end ੬ page 19), the other SR-V101US successively starts to play. (The cassette will automatically be rewound when the playback stops.) Therefore, the cassettes loaded on two SR-V101US will be played back alternately as many times as you want. To stop playback Press STOP/EJECT (0) on the SR-V101US which is playing back a cassette. NOTE: If there is a power outage during Series Playback, the playback will resume automatically when the power is restored to the VCR. (No setting is required for this function.) To prohibit operations during Series Playback (Mode Lock) Press and hold OK on the Remote for more than 5 seconds. " " and " " light up on the front display panel. The 2 cassettes will be played back alternately without any interruption. To resume the other operations, press and hold OK on the Remote again for more than 5 seconds. ● When OK is pressed to set Mode Lock, the on-screen display appears and the time counter remains on the TV screen. If the time counter is not necessary, set "ON SCREEN (PLAY)" to "OFF" (੬ pg. 18). Series Recording Camcorder or Another VCR To S Video Output To Audio/Video Output Audio/Video Cable (Not supplied) S-Video Cable (Not supplied) To S VIDEO IN To AUDIO/VIDEO IN SR-V101US-1 To REMOTE OUT To REMOTE IN To S VIDEO OUT S-Video Cable (Supplied) Audio/Video Cable (Supplied) To S VIDEO IN To AUDIO/ VIDEO IN To AUDIO/ VIDEO OUT Mini-plug cable (Not supplied) Mini-plug cable (Not supplied) SR-V101US-2 To AUDIO/ VIDEO OUT Audio/Video Cable (Supplied) To REMOTE OUT To REMOTE IN To S VIDEO OUT To Audio/Video Input S-Video Cable (Supplied) To S-Video Input NOTE: Select the correct input mode ("L-1" for the rear connector, "F-1" for the front connector). (੬step 3) S-VIDEO POWER REW FF 24HR QUICK REC LINK PROGRAM INSERT A.DUB Using two sets (or more) of SR-V101US, a long recording will be possible (such as camcorder recording, another VCR playback or TV broadcast). Use the buttons and controls on the VCR's front panel for the Series Recording operations (except when using Mode Lock). - 14 -