JVC SR-VDA300US Instruction Manual - Page 13

Tuner Setting Turn on the VCR and the TV, and select the AV mode on the TV. VCR TV CABLE/DBS 1 2 3 4 5 6 7 8 9 0 2 3 1 4 2 3 EN 13 Setting channels automatically - Auto Channel Set Use Auto Channel Set only if channels have not been set correctly by the Plug & Play setting. If you want to add or delete channels, and want to use the ghost reduction function, use Manual Channel Set (੬ pg. 14). 1 Access Main Menu screen Press MENU. 2 Access Tuner Set Up screen Press %fi to move the MAIN MENU highlight bar (arrow) to "TUNER SET UP", then Password SET UP FUNCTION SET UP press OK. 3 TUNER SET UP INITIAL SET UP PRESS (5∞), THEN (OK) PRESS (MENU) TO END 3 Perform Auto Channel Set You can automatically set the receivable channels in your area in the order of their frequencies. Press %fi to move the highlight bar (arrow) to "AUTO CHANNEL SET UP", then press OK. TUNER SET UP BAND CATV 3 AUTO CHANNEL SET UP MANUAL CHANNEL SET GUIDE CHANNEL SET CABLE BOX SET UP DBS RECEIVER SET UP PRESS (5∞), THEN (OK) PRESS (MENU) TO END AUTO CHANNEL SET UP NOTES: ● When Auto Channel Set SCANNING... is complete, "SCAN COMPLETED" appears on screen. PRESS (MENU) TO END ● If the scan was unsuccessful, "SCAN COMPLETED-NO SIGNAL" appears on screen. Check the connections and start again. 4 Return to normal screen Press MENU. INFORMATION The VCR selects the correct band (TV or CATV) automatically during Auto Channel Set. The selected band will be displayed on the right side of "BAND" on the Tuner Set Up screen.