JVC TH-C5 Instructions - Page 17
Operating external components with the remote control - remote code
UPC - 046838017469
View all JVC TH-C5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Operating external components with the remote control The buttons described below are used on pages 14 and 15. Number buttons Remote control mode selector (play button) NOTE • Manufacturers' codes are subject to change without notice. • Set the codes again after replacing the batteries of the remote control. Operating the TV 7 To set the manufacturer's code 1 Slide the remote control mode selector to TV. 2 Press and hold F TV. Keep the button pressed until step 4 is finished. 3 Press ENTER. 4 Press number buttons (1-9, 0) to enter the manufacturer's code (2 digits). Examples: For a Hitachi TV: Press 1, then 0. For a Toshiba TV: Press 0, then 8. Manufacturer JVC Hitachi Magnavox Mitsubishi Panasonic Philips RCA Code Manufacturer 01* Samsung 10 Sanyo 02 Sharp 03 Sony 04, 11 Toshiba 15 Zenith 05 Code 12 13, 14 06 07 08 09 * "01" is the initial setting. 5 Release F TV. If there is more than one code listed for corresponding brand, try each one until you enter the correct one. 7 Operation Aim the remote control at the TV. IMPORTANT Before using the remote control to operate a TV; • Set the remote control mode selector to TV. The following buttons are available: F TV: Turns TV on and off. TV VOL +/-: Adjusts the volume. TV/VIDEO: Selects the input mode (either TV or VIDEO). CH +/-: Changes the channels. 1-10, 0, h10 (100+): Selects the channel. TV RETURN: Alternates between the previously selected channel and the current channel. NOTE • The operating buttons may differ depending on manufacturers. 14