JVC THD60 Instructions - Page 8

Getting started Checking the supplied accessories Connecting the speakers and subwoofer If anything is missing, contact your dealer immediately. • Remote control (x 1) • Batteries (x 2) • FM antenna (x 1) • AM loop antenna (x 1) • Composite video cord (x 1) • Connector for iPod - TH-D60/TH-D50: Docking station for iPod (x 1) - TH-D5/TH-D4: Connection cable for iPod (x 1) Stand for iPod (x 1) • Speaker cords: 3 m (10 ft) (x 4), 8 m (26.3 ft) (x 2) • Feet - TH-D60: For surround speakers (x 8) - TH-D50/TH-D5/TH-D4: For front and surround speakers (x 16) • Screws (TH-D60 only): M5 x 85 mm (3-3/8 inches) (x 6) Speaker cords: : 3 m (10 ft) : 8 m (26.3 ft) Center unit To center speaker (SP-THD6C/SP-THD5C) To front right speaker (SP-THD6F/SP-THD5F) To front left speaker (SP-THD6F/SP-THD5F) To subwoofer (SP-THD6W/ SP-THD5W) Putting batteries into the remote control R03 (UM-4)/AAA (24F) type dry-cell batteries (supplied) To surround right speaker (SP-THD6S/SP-THD5S) To surround left speaker (SP-THD6S/SP-THD5S) If you connect speakers other than those supplied for the System, use speakers of the same speaker impedance (SPEAKER IMPEDANCE) indicated on the rear of the center unit. DO NOT connect more than one speaker to one speaker terminal. Do not expose batteries to heat or flame. If the range or effectiveness of the remote control decreases, replace both batteries. Connecting the speaker cords Connect the speaker cords both to the center unit and to each speaker. On the center unit: On the speaker: Speaker cord Speaker cord • Connect the black cords to the r terminals. • Connect the white cords to the q terminals. 5