JVC TS-C500SPG Instructions - Page 3
Attaching the front speakers to the GM-X50 series display
View all JVC TS-C500SPG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
ENGLISH Attaching the front speakers to the GM-X50 series display Using the speaker brackets, you can attach the front speakers to the side of the display. • Do not loosen the screws other than the protective screws. • Use only the supplied mounting screws for attaching the front speakers. 1. Remove the protective screws on the back of the display with phillips screwdriver. Protective screw Protective screw 2. Attach the front speaker to the back of the display. 1 Turn the mounting screws with phillips screwdriver, leaving a length of about 3 mm. 2 Hook the speaker bracket onto three mounting screws through the screw holes (A), and slide it down. Screw hole (A) 3. Tighten the mounting screws firmly with phillips screwdriver. • When moving the display, do not hold the speakers. • The speakers are not of anti-magnetic type. Do not place anything susceptible to magnetism, such as a video tape, nearby when setting the speakers. 2