JVC XV-M50BK Instruction Manual - Page 42
Audio Subtitle, On Screen Language, Digital Audio Output
View all JVC XV-M50BK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Initial settings Initial settings SUBTITLE You can select the default subtitle language to be displayed if it is contained on the disc. Each time you press CURSOR 3, the language setting changes in the following order: LANGUAGE AUDIO DISPLAY SYSTEM MENU LANGUAGE AUDIO LANGUAGE SUBTITLE ON SCREEN LANGUAGE ENGLISH ENGLISH ENGLISH ENGLISH EXIT PRESS KEY ENGLISH → SPANISH → FRENCH → CHINESE → GERMAN → ITALIAN → JAPANESE → language code from AA to ZU (See "Appendix A: Table of languages and their abbreviations" at the end of this manual.) Pressing CURSOR 2 changes the language setting in the reverse order of the above. * If the selected language is not recorded, the disc's default subtitle language will be displayed. ON SCREEN LANGUAGE You can select the on-screen display language to be displayed. Each time you press CURSOR 3, the language setting changes as follows: LANGUAGE AUDIO DISPLAY SYSTEM MENU LANGUAGE AUDIO LANGUAGE SUBTITLE ON SCREEN LANGUAGE ENGLISH ENGLISH ENGLISH ENGLISH EXIT PRESS KEY English ON SCREEN LANGUAGE German BILDSCHIRMMENUE-SPRACHE ENGLISH DEUTSCH French FRANCAIS Pressing CURSOR 2 changes the language setting in the reverse order of the above. 40 AUDIO page DIGITAL AUDIO OUTPUT To connect the unit's digital output to an external device equipped with a digital input, this item must be set correctly. LANGUAGE AUDIO DISPLAY SYSTEM DIGITAL AUDIO OUTPUT DOWN MIX COMPRESSION STREAM / PCM Lo / Ro ON PRESS KEY EXIT • PCM ONLY When you connect the DIGITAL OUT jack of the unit to the linear PCM digital input of other audio equipment. • STREAM/PCM When you connect to the digital input of an amplifier to a built-in DTS, Dolby Digital, or MPEG multichannel decoder. • DOLBY DIGITAL/PCM When you connect to the digital input of a Dolby Digital decoder, or an amplifier with a built-in Dolby Digital decoder. The following chart shows the relationship between types of playback discs and output signals. Output Playback discs STREAM/ PCM DOLBY DIGITAL/ PCM PCM ONLY DVD with 48 kHz, 48 kHz,16 bit 16 bit linear PCM linear PCM + + DVD with 48 kHz, 48 kHz, 20/24 bit linear 20/24 bit + + PCM linear PCM DVD with 96 kHz, No output linear PCM + + DVD with DTS DTS bitstream No ouput + DVD with Dolby Dolby Digital Digital bitstream + 48 kHz, 16 bit linear PCM DVD with MPEG MPEG multichannel bitstream 48 kHz, 16 bit linear PCM + Video CD 44.1 kHz, 16 bit + + linear PCM Audio CD 48 kHz,16 bit linear PCM + + Audio CD with DTS DTS bitstream + + NOTES • The unit does not provide the DTS decoding function. • When playing a DVD VIDEO or Audio CD disc with DTS, use a DTS decoder to get correct signals from your speakers. Never use the unit's analog output jacks, which output incorrect signals that may damage your speakers. • If you connect the analog outputs and digital outputs simultaneously, be sure to select the source of the amplifier correctly, or set the level control of the amplifier connected to the analog outputs to minimum.