Jabra A7010 User Manual - Page 14

english English If you move too far from the Jabra A7010, the call will be routed to your desk phone handset. Return into range within 60 seconds and the call will be re-routed back to the headset. If you stay out of range for more than 60 seconds, the call may remain active (this is phone dependent, please check your desk phone user manual for more information). Remember! In general, you will get better performance when there are no obstructions between your headset and your Jabra A7010. * up to 33 feet/10 meters in line of sight depending on your headset 5 For use with desk phone without headset port This set up will work for most desk phones (not cordless phones). NOTE: in the following pages, all references to "Tap the headset Answer/End button" refer to the action needed for most common Jabra headsets available. Yours may differ - please refer to your headset's user manual. Jabra A7010 set up Connecting your Jabra A7010 with your desk phone and power supply · Disconnect the handset from your desk phone (by unplugging the handset from the desk phone handset port). · Connect the desk phone handset port to the Jabra A7010's desk phone socket (7) using the supplied connection cord (desk phone-to-Bluetooth Hub (C)). · Connect the power supply (B) to your Jabra A7010's power supply socket (10). · Connect the handset to your Jabra A7010's handset socket (6). 24 Jabra A7010 Bluetooth Hub Jabra A7010 Bluetooth Hub 25