Jabra BT3030 User manual - Page 7
Pairing Your Headset With Your Phone - instructions
UPC - 607421740289
View all Jabra BT3030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
english Please note that the LED indicator light turns off after 1 minute to save battery. To check if the headset is on, tap the answer/end button once - the LED indicator light will flash, if the headset is on. Pairing your headset with your phone Headsets are connected to phones using a procedure called 'pairing'. By following a few simple steps, a phone can easily be paired with a headset. 1. Put the headset in pairing mode When you turn on your Jabra BT3030 for the first time, the headset will automatically start up in pairing mode - i.e. it is discoverable for your phone. When the headset is in pairing mode the LED is constantly lit with a blue light. 2. Set your Bluetooth phone to 'discover' the Jabra BT3030 Follow your phone's instruction guide. First make sure that Bluetooth is activated on your mobile phone. Then set your phone to discover the headset. This usually involves going to a 'setup,' 'connect' or 'Bluetooth' menu on your phone and selecting the option to 'discover' or 'add' a Bluetooth device.* (See example from a typical mobile phone in fig. 1). 3. Your phone will find the Jabra BT3030 Your phone will find the headset under the name BT3030. Your phone then asks if you want to pair with the headset. Accept by pressing 'Yes' or 'OK' on the phone and confirm with the passkey or PIN = 0000 (4 zeros). Your phone will confirm when pairing is complete. Fig. 1 Connectivity MobilSurf Bluetooth Infrared port WAP options Synchronization Networks Select Info Devices found JABRA BT3030 Select JABRA BT3030 Passkey: Ok Handsfree JABRA BT3030 Added. The handsfree is now ready for use Ok Jabra BT3030 Bluetooth headset