Jabra SP5050 User Manual - Page 6

1. Charge your headset Make sure that your Jabra SP5050 Speakerphone is fully charged for two hours before you start using it. Use only the charger provided in the box - do not use chargers from any other devices as this might damage your Jabra SP5050. Connect your Speakerphone as shown in fig 2. When the LED indicator light is solid red on the car charger, your headset is charging. When the LED indicator light is green, it is fully charged. 2. Turning your Speakerphone on and off Press the answer / end button to turn on your Speakerphone (see fig 1). The power on indicator light will turn on. The connecting status indicator light will blink twice every 2 second until the Jabra SP5050 is connected to your mobile phone - then it will turn solid blue. To turn off your Speakerphone press the answer/end button until you see a burst of flashes. With Jabra AutoOff, your Speakerphone will automatically turn off 15 minutes after it has lost the connection to your mobile phone. So it doesn't matter if you don't turn off your SP5050 when you leave the car - SP5050 will take care of that for you. 3. Pair it with your phone Before you can use your Jabra SP5050, you need to pair it with your mobile phone. 1. With Jabra Autopairing, your Speakerphone will automati- cally enter pairing mode the first time you turn it on. 2. Set your Bluetooth phone to 'discover' the Jabra SP5050. Follow your phone's instruction guide. This usually involves going to a 'setup,''connect' or 'Bluetooth' menu on your phone and selecting the option to 'discover' or 'add' a Bluetooth device.* (See example from a typical mobile phone in fig 3). Jabra JX10 Bluetooth headset