Jamo MPA-101 Owner/User Manual - Page 12

Specifications

Page 12 highlights

Specifications Rated Power Output Total Harmonic Distortion (THD) Signal-to-Noise Ratio Crossover Freq. Responce (-3dB): Auto Turn On Sensitivity Delay „OFF" Time Input Sensitivity Line In Line Out Freq. Response (-3dB) Input Impedance Line In Max. noise+hum Vol Max Clearance for ventilation - Back Power Requirement Weight Shipping Weight Dimentions: Width Height Depth Clearance for ventilation Top Back 50 Watts (Stereo) into 4✡ Load 100 Watts (BTL) into 8✡ Load

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

12
Specifications
Rated Power Output
Total Harmonic Distortion (THD)
Signal-to-Noise Ratio
Crossover Freq. Responce (-3dB):
Auto Turn On Sensitivity
Delay „OFF“ Time
Input Sensitivity Line In
Line Out Freq. Response (-3dB)
Input Impedance Line In
Max. noise+hum Vol Max
Clearance for ventilation - Back
Power Requirement
Weight
Shipping Weight
Dimentions:
Width
Height
Depth
Clearance for ventilation
Top
Back
50 Watts (Stereo) into 4
Load
100 Watts (BTL) into 8
Load
<0.1%
@ Min position 28-45Hz 40Hz/0dB ref
@ Max position 32-60Hz 40Hz/odB ref
11.0V +/-3 Full Range 1KHz
7.0V +/-2 Sub Input 50 Hz
15 - 20 minutes
Output 1 W/4
with:
Full Range 44mV +/-10 1KHz
Sub In 7mV +/-2 50Hz
20Hz +/-5K - 20 KHz +/-5K 1KHz/0dB ref
47K
+/-5
<3.0mV, Input Shorted
Minimum 2" (50mm)
115V 60Hz
7.8lbs (3.6 kgs)
8.6lbs (3.9kgs)
6.000“ (152.00mm)
3.125“ (79.00mm)
11.4375“ (290.00mm)
Minimum 3/8“ (10 mm)
Minimum 2“ (50 mm)