Jenn-Air JEC3430H Installation Instructions - Page 3

■■ The cooktop should be installed away from strong draft areas, such as windows, doors, fans or strong heating vents. The cooktop should be located for convenient use in the kitchen. ■■ Use the countertop opening dimensions that are given with these Installation Instructions. Given dimensions are minimum clearances and provide 0" (0 cm) clearance. ■■ Grounded electrical supply is required. See "Electrical Requirements" section. IMPORTANT: To avoid damage to your cabinets, check with your builder or cabinet supplier to make sure that the materials used will not discolor, delaminate, or sustain other damage. Product Dimensions Cabinet Dimensions IMPORTANT: If installing a range hood or microwave hood combination above cooking surface, follow the range hood or microwave hood combination installation instructions for dimensional clearances above the cooktop surface. A D C B A D B C L E F G H I K J F E A. Glass depth - black and white models - 21 ³⁄4" (55.2 cm) Glass depth - stainless steel models - 22 ¹⁄8" (56.4 cm) B. Glass width - 24" (60.9 cm) models - 23 13/16" (60.5 cm) Glass width - 30" (76.2 cm) models - 30 13/16" (78.4 cm) Glass width - 36" (91.4 cm) models - 36 5/16" (92.3 cm) C. Frame depth - 20 5⁄16" (51.6 cm) D. Frame width - 24" (60.9 cm) models - 21 59/64" (55.7 cm) Frame width - 30" (76.2 cm) models - 29" (73.7 cm) Frame width - 36" (91.4 cm) models - 34 7/16" (87.5 cm) E. Cooktop height with bottom heat shield - 3 7⁄8" (9.8 cm) Cooktop height lighted knobs - 4 /15 16 (12.55 cm) F. Cooktop height including conduit (located at rear of cooktop, right side) - 5" (12.7 cm) Cooktop height lighted knobs, including conduit (located at rear of cooktop, right side) - 6 1/16" (15.4 cm) A A. Location of Power Cord (length of power cord is 48" (121.9 cm), including the conduit) A. 24" (60.9 cm) on 24" models; 30" (76.2 cm) on 30" models; 36" (91.4 cm) on 36" models B. Combustible area above countertop (shown by dashed box above) C. 30" (76.2 cm) minimum clearance between top of cooktop platform and bottom of uncovered wood or metal cabinet (24" [61 cm] minimum clearance if bottom of wood or metal cabinet is covered by not less than ¹⁄4"[0.6 cm] flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" [0.04 cm] stainless steel, or 0.024" [0.06 cm] aluminum or 0.020" [0.05 cm] copper) D. 13" (33 cm) recommended upper cabinet depth E. 2" (5.1 cm) F. 20¹⁄2" (52.0 cm) recommended cutout. Will fit in cutout from 20³⁄8"-209⁄16" (51.8-52.2 cm). G. 18" (45.7 cm) minimum clearance from upper cabinet to countertop within minimum horizontal clearances to cooktop H. Junction box or outlet: 7" (17.8 cm) minimum from top of countertop I. Junction box or outlet: 9" (23.0 cm) maximum from right side of cabinet J. 29¹⁄2" (74.9 cm) recommended cutout on 30" (76.2 cm) models. Will fit in cutout from 29 ¹⁄16"-29 9⁄16" (73.8-75.1 cm) on 30" (76.2 cm) models. 35¹⁄2" (90.2 cm) recommended cutout on 36" (91.4 cm) models. Will fit in cutout from 34 9⁄16"-35 9⁄16" (87.8-90.3 cm) on 36"(91.4 cm) models. 22 5/16" (56.67 cm) recommended cutout on 24" (61.0 cm) Will fit in cutout from 22 1/4 - 22 3/7 (56.4 - 57.0 cm) on 24 (61.0 cm) models. K. 2 1/2" (6.35 cm) minimum distance to nearest left and right side combustible surface above cooktop L. 1 1/2" (3.81 cm) minimum clearance between back wall and countertop NOTES: After making the countertop cutout, some installations may require notching down the base cabinet side walls to clear the cooktop base. To avoid this modification, use a base cabinet with sidewalls wider than the cutout. If cabinet has a drawer, a 5¹⁄2" (14.0 cm) depth clearance from the top of the countertop to the top of the drawer (or other obstruction) in base cabinet is required. 3