Jenn-Air JED3536GB Installation Instructions - Page 2
Cooktop Safety, Installation Requirements
View all Jenn-Air JED3536GB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
COOKTOP SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING." These words mean: DANGER You can be killed or seriously injured if you don't immediately follow instructions. WARNING You can be killed or seriously injured if you don't follow instructions. All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed. INSTALLATION REQUIREMENTS Tools and Parts Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here. Tools needed ■■ Tape measure ■■ Marker or pencil Parts needed ■■ A UL Listed or CSA Approved strain relief for 7/8" (2.2 cm) knockout. ■■ A UL Listed or CSA Approved conduit connector for 1/2" (1.3 cm) trade-size metal-clad conduit ■■ Flat-blade screwdriver ■■ Pliers ■■ UL Listed wire connectors ■■ Phillips head screwdriver ■■ 1/4" drill bit ■■ Metal ducting ■■ Drill ■■ Level ■■ 6" socket extension Parts supplied ■■ Jigsaw ■■ Ratchet with 3/8" socket ■■ 1/4" nut driver ■■ Wall cap 6" (15.2 cm) Round Surface Wall Cap Damper Order Part Number A406 31/4" x 10" (8.3 cm x 25.4 cm) Surface Wall Cap Damper Order Part Number A403 ■■ Vent grille ■■ Pre-filter ■■ Plenum ■■ Plenum screw pack ■■ Downdraft motor assembly To order, see the "Assistance or Service" section of the Use and Care Guide. ■■ Vent clamps Check local codes. Check existing electrical supply. See the "Electrical Requirements" section. It is recommended that all electrical connections be made by a licensed, qualified electrical installer. 2