Jenn-Air JIC4430XB Dimension Guide - Page 2
Induction Cooktop
View all Jenn-Air JIC4430XB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
JENN-AIR® DETAILED PLANNING DIMENSIONS 30" INDUCTION COOKTOP JIC4430X - 305⁄16" x 41⁄8" x 215⁄16" 2 of 2 OPENING/CLEARANCE DIMENSIONS A D* B F E B G e C FRONT VIEW Side Cabinet MODEL # JIC4430X in cm A Width of combustible area above cooking surface (min.) 291⁄2 75.0 B Width from cooktop to fixed wall or other combustible material (min.) 1 2.5 C Width to ouSidteer edge of outlet (min.) Cabinet D* Height to bottom of uncovered wood or metal cabinet above cooking surface (min.) 10 25.4 30 76.2 E Height to boHttom of uncovered wood or metal cabinet (min.) 18 45.7 Required heightIof ventilation opening in front F cabinet under countertop for proper ventilation ⁄3 16 0.5 - full width of cooktop G Height to top edge of outlet (min.) 12 30.5 H Depth of upper cabinet (recommended) 13 33.0 I Depth from cutout to wall (min.) 1 2.5 J Width of cutout 291⁄2 75.0 K Depth of cutout 195⁄16 49.0 L Depth from cutout to front of countertop 2 5.1 e Recommended electrical access location *Dimension can be reduced by 6" (15.2 cm) when bottom of wood or metal cabinet is covered by not less than 1⁄4" (0.6 cm) flame retardant millboard covered with not less than No. 28 MSG sheet metal, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper. If installing a hood or microwave hood combination above the cooktop, follow the hood or microwave hood combination instructions for dimensional clearances above the cooking surface. ELECTRICAL REQUIREMENTS 240 volt, 60 Hz, AC only, 40-amp fused, grounded circuit is required. A dedicated circuit is recommended. The length of conduit provided is for serviceability to the cooktop. LOCATION REQUIREMENTS • To ensure cooktop base clearance, cabinet side walls need to be wider than the cutout. • If cabinet has a drawer, allow a 51⁄8" (13.0 cm) minimum clearance between A countertop and top of drawer. H E I D* B J I K F G e C SIDE VIEW L TOP VIEW - CUTOUT IMPORTANT: Dimensional specifications are provided for planning purposes only. Do not make any cutouts based on this information. Refer to the Installation or Use & Care Guide before selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation. All Jenn-Air® appliances are appropriately UL, CUL or CSA approved. 8640dZw1215