Jenn-Air JIC4530KS Installation Instructions - Page 5

Table 1 CUT OUT (range) Model F J X 24" 207/16" (51.9 cm)203/4" (52.7 cm) 2113/16" (55.4 cm)2115/16" (55.7 cm) A 30" 207/16" (51.9 cm)203/4" (52.7 cm) 291/2" (74.9 cm)295/8" (75.2 cm) 36" 207/16" (51.9 cm)203/4" (52.7 cm) 357/16" (90.0 cm)359/16" (90.3 cm) NOTE: After you make the countertop cutout, some installations may require notching down the base cabinet side walls to clear the cooktop base. To avoid this modification, use a base cabinet with sidewalls wider than the cutout. Y If cabinet has a drawer, a 51∕8" (13 cm) depth clearance from the countertop to the top of the drawer (or other obstruction) in base cabinet is required. Flush Installation - Frameless Detail A 1 4" (6 mm) R4 ± 0.5 1³ ₁₆" (3 cm) R5.5 ± 0.5 Glass radius 2 mm Electrical Requirements WARNING Model 24" 30" 36" X 2513/16" (65.5 cm) 31" (78.7 cm) 361/2" (92.7 cm) Y 217/16" (54.5 cm) 217/16" (54.5 cm) 217/16" (54.5 cm) Electrical Shock Hazard Disconnect power before servicing. Use 8 gauge copper wire. Electrically ground cooktop. Failure to follow these instructions can result in death, fire, or electrical shock. If codes permit and a separate ground wire is used, it is recommended that a qualified electrical installer determine that the ground path and wire gauge are in accordance with local codes. Check with a qualified electrical installer if you are not sure the cooktop is properly grounded. It is not recommended to have a fuse in the neutral or ground circuit. Make sure that the electrical connection and wire size are adequate and in conformance with the National Electrical Code, ANSI/NFPA 70-latest edition or CSA Standards C22. 1-94,Canadian Electrical Code, Part 1 and C22.2 No. O-M91-latest edition, and all local codes and ordinances. A copy of the above code standards can be obtained from: National Fire Protection Association 1 Batterymarch Park Quincy, MA 02169-7471 CSA International 8501 East Pleasant Valley Road Cleveland, OH 44131-5575 5