Jenn-Air JIM158XXCX Use and Care - Page 3
Ice Maker Safety, Installation Instructions - appliances
View all Jenn-Air JIM158XXCX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
ICE MAKER SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING." These words mean: DANGER You can be killed or seriously injured if you don't immediately follow instructions. WARNING You can be killed or seriously injured if you don't follow instructions. All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed. IMPORTANT SAFETY INSTRUCTIONS WARNING: To reduce the risk of fire, electric shock, or injury when using your ice maker, follow these basic precautions: ■ Plug into a grounded 3 prong outlet. ■ Do not remove ground prong. ■ Do not use an adapter. ■ Do not use an extension cord. ■ Disconnect power before cleaning. ■ Disconnect power before servicing. ■ Replace all parts and panels before operating. ■ Use two or more people to move and install ice maker. SAVE THESE INSTRUCTIONS INSTALLATION INSTRUCTIONS Tools and Parts TOOLS NEEDED: Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here. ■ Cordless drill ■ Masking tape ■ Phillips screwdriver ■ Tape measure ■ Router or planer ■ Pencil ■ Towel or piece of cardboard PARTS NEEDED: Custom Overlay Door Panel-See "Custom Panel Installation Instructions," #8 x ¹⁄₂" pan head wood screws (8) PARTS SUPPLIED: ■ Adhesive pads (4) Custom Panel Dimensions If you plan to install a custom overlay panel, you will need to make the panel yourself or consult a qualified cabinetmaker or carpenter. IMPORTANT: ■ The thickness of the overlay panel must be ³⁄₄" (1.91 cm). ■ Overlay panel must not weigh more than 8 lbs (3.62 kg). ■ Overlay panels weighing more than recommended may cause damage to your ice maker. ■ Match wood grain direction with that of adjacent cabinets. ■ Sand panel edges to provide a smooth finish. ■ Use moisture sealer on both sides and all edges of the panel to avoid damage from moisture. 3