Jenn-Air JJW3830DS Dimension Guide - Page 4

JENN-AIR® DETAILED PLANNING DIMENSIONS 30" DOUBLE WALL OVENS - FLUSH INSTALLATION JJW3830D, JJW2830D, JJW2730D - 30" x 533⁄8" x 245⁄16" (depth without handles) 4 of 4 OPENING/CLEARANCE DIMENSIONS MODEL # JJW3830D JJW2830D JJW2730D F G H I in cm A Width of flush inset cutout (min.) 301⁄4 76.8 J B Width of opening (min.) 287⁄8 73.3 C D 9/16" (1.4 cm) Top Cleat* 9/16" (1.4 cm) Top Cleat* A A B B C D C Height of flush inset cutout (min.) D Height of opening (min.) E Bottom of cutout to floor F Depth of cutout (min.) 533⁄16 525⁄8 45⁄8143⁄4 253⁄8 135.1 133.6 11.737.5 64.4 e Recommended junction box location 11/16" (1.7 cm) Side Cleat* 11/1116/"16("1(.17.7cmcm) ) SiSdiedeClCelaeta*t* 11/16" (1.7 cm) Side Cleat* 1/2" x 2" (1.3 x 5.1 1c/m2")x 2" (1.3 x 5.1 cm) Spacer (entire depStphacAer (entire depth of cutout) of cutouBt) e e e e F E E FRONT VIEW F C SIDE VIEW ELDECTRICAL REQUIREMENTS 240 vEolt, 40-amp fused, grounded circuit is required. A dedicated circuit is required. The length of conduit provided is for serviceability. Do not cut the conduit. The junction box should be located 3" (7.6 cm) maximum below the support surface. Drill a 1" (2.5 cm) minimum diameter hole in the right rear or left rear corner of the support F surface for access to the junction box. FLUSH INSTALLATION REQUIREMENTS A 253⁄8" (64.4 cm) minimum cutout depth is required. These dimensions will result in a 1⁄4" (0.6 cm) reveal on the top, a 1⁄4" (0.6 cm) reveal on the sides and a 1⁄8" (0.3 cm) reveal on the bottom of the wall oven. The front face of the cleats and spacers will be visible and should be treated as a finished surface. Power Supply Location F Side Cleat* Side Cleat* 13/8" (3.5 cm) TOP VIEW BACK VIEW * Cleats and spacers must be recessed 13⁄8 (3.5 cm) from the front of the cabinet. IMPORTANT: Dimensional specifications are provided for planning purposes only. Do not make any cutouts based on this information. Refer to the Installation Guide before selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation. All Jenn-Air® appliances are appropriately UL, CUL or CSA approved. 8333AdZw615