Jenn-Air JJW3830DS Installation Instruction - Page 3

Product Dimensions - Single Ovens, Cabinet Dimensions - Single Ovens - installation

Page 3 highlights

■ Electrical supply junction box should be located 3" (7.6 cm) maximum below the support surface when the oven is installed in a wall cabinet. A 1" (2.5 cm) minimum diameter hole should have been drilled in the right rear or left rear corner of the support surface to pass the appliance cable through to the junction box. NOTE: For undercounter installation, it is recommended that the junction box be located in the adjacent right or left cabinet. If you are installing the junction box on rear wall behind oven, it is recommended that the junction box be recessed and located in the upper center of the cabinet. ■ Oven support surface must be solid, level and flush with bottom of cabinet cutout. ■ Floor must be able to support a single oven weight of 129 lbs (59 kg) for 27" (68.6 cm) models or 154 lbs (70 kg) for 30" (76.2 cm) models. ■ Floor must be able to support a double oven weight of 251 lbs (114 kg) for 27" (68.6 cm) models or 288 lbs (131 kg) for 30" (76.2 cm) models. IMPORTANT: To avoid damage to your cabinets, check with your builder or cabinet supplier to make sure that the materials used will not discolor, delaminate or sustain other damage. This oven has been designed in accordance with the requirements of UL and CSA International and complies with the maximum allowable wood cabinet temperatures of 194°F (90°C). Undercounter Installation (With Cooktop Installed Above): Ovens approved for this type of installation have an approval label located on the top of the oven. Refer to Cutout Dimensions For Ovens Installed Under Cooktop (separate sheet). Product Dimensions - Single Ovens Cabinet Dimensions - Single Ovens Single Oven Undercounter (Without Cooktop Installed Above) A B E D C 27" (68.6 cm) models A. 27" (68.6 cm) min. cabinet width B. 1¹⁄₂" (3.8 cm) min. top of cutout to underside of countertop C. 5¹⁄₄" (13.3 cm) bottom of cutout to floor D. 25¹⁄₂" (64.8 cm) cutout width E. 28" (71.2 cm) min. cutout height 30" (76.2 cm) models A. 30" (76.2 cm) min. cabinet width B. 1¹⁄₂" (3.8 cm) min. top of cutout to underside of countertop C. 5¹⁄₄" (13.3 cm) bottom of cutout to floor D. 28¹⁄₂" (72.4 cm) cutout width E. 28" (71.2 cm) min. cutout height Single Ovens Installed in Cabinet A B G F C A E D 27" (68.6 cm) models A. 29⁷⁄₈" (75.8 cm) max. overall height B. 25 64.6 cm) max. recessed width C. 27 69.0 cm) recessed height D. 23¹⁄₄" (59.1 cm) max. recessed depth E. 27" (68.6 cm) overall width F. 12" (30.5 cm) from back of control panel to start of strain relief G. 48" (121.9 cm) flexible conduit length 30" (76.2 cm) models A. 29⁷⁄₈" (75.8 cm) max. overall height B. 28 72.2 cm) max. recessed width C. 27 69.0 cm) recessed height D. 23¹⁄₄" (59.1 cm) max. recessed depth E. 30" (76.2 cm) overall width F. 12" (30.5 cm) from back of control panel to start of strain relief G. 48" (121.9 cm) flexible conduit length B D F G E C 27" (68.6 cm) models A. 27" (68.6 cm) min. cabinet width B. 2 5.5 cm) top of cutout to bottom of upper cabinet door C. 32" (81.3 cm) bottom of cutout to floor D. 25¹⁄₂" (64.8 cm) cutout width E. 1¹⁄₂" (3.8 cm) min. bottom of cutout to top of cabinet door F. 28" (71.2 cm)* recommended cutout height G. 24" (60.7 cm) cutout depth 30" (76.2 cm) models A. 30" (76.2 cm) min. cabinet width B. 2 5.5 cm) top of cutout to bottom of upper cabinet door C. 32" (81.3 cm) bottom of cutout to floor D. 28¹⁄₂" (72.4 cm) cutout width E. 1¹⁄₂" (3.8 cm) min. bottom of cutout to top of cabinet door F. 28" (71.2 cm)* recommended cutout height G. 24" (60.7 cm) cutout depth *NOTE: The cutout height can be between 26 and 29 68.4 cm and 74.8 cm) for single ovens. 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

3
Electrical supply junction box should be located 3" (7.6 cm)
maximum below the support surface when the oven is
installed in a wall cabinet. A 1" (2.5 cm) minimum diameter
hole should have been drilled in the right rear or left rear
corner of the support surface to pass the appliance cable
through to the junction box.
NOTE:
For undercounter installation, it is recommended
that the junction box be located in the adjacent right or
left cabinet. If you are installing the junction box on rear
wall behind oven, it is recommended that the junction box
be recessed and located in the upper center of the cabinet.
Oven support surface must be solid, level and flush with
bottom of cabinet cutout.
Floor must be able to support a single oven weight of 129 lbs
(59 kg) for 27" (68.6 cm) models or 154 lbs (70 kg) for 30"
(76.2 cm) models.
Floor must be able to support a double oven weight of
251 lbs (114 kg) for 27" (68.6 cm) models or 288 lbs
(131 kg) for 30" (76.2 cm) models.
IMPORTANT:
To avoid damage to your cabinets, check
with your builder or cabinet supplier to make sure that the
materials used will not discolor, delaminate or sustain other
damage. This oven has been designed in accordance with
the requirements of UL and CSA International and complies
with the maximum allowable wood cabinet temperatures of
194°F (90°C).
Undercounter Installation (With Cooktop Installed Above):
Ovens approved for this type of installation have an approval
label located on the top of the oven. Refer to Cutout Dimensions
For Ovens Installed Under Cooktop (separate sheet).
Product Dimensions - Single Ovens
Cabinet Dimensions - Single Ovens
Single Oven Undercounter (Without Cooktop Installed Above)
Single Ovens Installed in Cabinet
*NOTE:
The cutout height can be between 26
¹⁵⁄₁₆
" and 29
⁷⁄₁₆
"
(68.4 cm and 74.8 cm) for single ovens.
27" (68.6 cm) models
A. 29
⁷⁄₈
" (75.8 cm) max.
overall height
B. 25
⁷⁄₁₆
" (64.6 cm) max.
recessed width
C. 27
³⁄₁₆
" (69.0 cm)
recessed height
D. 23
¹⁄₄
" (59.1 cm) max.
recessed depth
E. 27" (68.6 cm) overall width
F. 12" (30.5 cm) from back
of control panel to start
of strain relief
G. 48" (121.9 cm) flexible
conduit length
30" (76.2 cm) models
A. 29
⁷⁄₈
" (75.8 cm) max.
overall height
B. 28
⁷⁄₁₆
" (72.2 cm) max.
recessed width
C. 27
³⁄₁₆
" (69.0 cm)
recessed height
D. 23
¹⁄₄
" (59.1 cm) max.
recessed depth
E. 30" (76.2 cm) overall width
F. 12" (30.5 cm) from back
of control panel to start
of strain relief
G. 48" (121.9 cm) flexible
conduit length
B
D
E
A
C
G
F
27" (68.6 cm) models
A. 27" (68.6 cm) min.
cabinet width
B. 1
¹⁄₂
" (3.8 cm) min. top
of cutout to underside
of countertop
C. 5
¹⁄₄
" (13.3 cm) bottom
of cutout to floor
D. 25
¹⁄₂
" (64.8 cm) cutout
width
E. 28" (71.2 cm) min.
cutout height
30" (76.2 cm) models
A. 30" (76.2 cm) min.
cabinet width
B. 1
¹⁄₂
" (3.8 cm) min. top
of cutout to underside
of countertop
C. 5
¹⁄₄
" (13.3 cm) bottom
of cutout to floor
D. 28
¹⁄₂
" (72.4 cm) cutout
width
E. 28" (71.2 cm) min.
cutout height
27" (68.6 cm) models
A. 27" (68.6 cm) min.
cabinet width
B. 2
³⁄₁₆
" (5.5 cm) top of cutout to
bottom of upper cabinet door
C. 32" (81.3 cm) bottom of cutout
to floor
D. 25
¹⁄₂
" (64.8 cm) cutout width
E. 1
¹⁄₂
" (3.8 cm) min. bottom of
cutout to top of cabinet door
F. 28" (71.2 cm)*
recommended cutout height
G. 24" (60.7 cm) cutout depth
30" (76.2 cm) models
A. 30" (76.2 cm) min.
cabinet width
B. 2
³⁄₁₆
" (5.5 cm) top of cutout to
bottom of upper cabinet door
C. 32" (81.3 cm) bottom of
cutout to floor
D. 28
¹⁄₂
" (72.4 cm) cutout width
E. 1
¹⁄₂
" (3.8 cm) min. bottom of
cutout to top of cabinet door
F. 28" (71.2 cm)* recommended
cutout height
G. 24" (60.7 cm) cutout depth
A
B
C
D
E
F
E
B
C
A
D
G