Jenn-Air JJW3830IM Installation Instructions - Page 15
Install Warming Drawer Deflector, Kit Only for Ovens Installed, Above Warming Drawers, Complete
View all Jenn-Air JJW3830IM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Install Warming Drawer Deflector Kit (Only for Ovens Installed Above Warming Drawers) On single and double oven models installed above a warming drawer, a warming drawer deflector kit must be installed. See the "Tools and Parts" section for information on ordering. Parts Supplied in Deflector Kit A 4. Using one #8-18 x 3/8" (9.5 mm) screw (E) on each side of the vent tab (B), fasten the vent securely to the oven. A B A. Phillips head screws (4) B. Warming drawer deflector (1) Install Deflector Kit 1. Flex the upper vent piece (C) away from the lower vent piece (D) to slide the warming drawer deflector (B) between them. Some force may be required to flex the upper vent trim (C) away from the lower vent trim (D). Some force may also be required to flex the warming drawer deflector (B) and slide it into position. Make sure screw holes are properly aligned between the two pieces. See the following illustration. 2. Install the warming drawer deflector (B) to the lower vent piece (D) using two #8-18 x 1/4" (6.6 mm) screws on each side. A B C B D C D A. #8-18 x 1/4" (6.6 mm) screws C. Upper vent piece B. Warming drawer deflector D. Lower vent piece 3. Align vent tab (B) with oven frame (A) as shown in the following illustration. B E D A. Oven frame B. Vent tab C. Oven vent C D. Warming drawer deflector E. #8-18 x 3/8" (9.5 mm) screw Complete Installation 1. Check that all parts are now installed. If there is an extra part, go back through the steps to see which step was skipped. 2. Check that you have all of your tools. 3. Dispose of/recycle all packaging materials. 4. For oven use and cleaning, read the Use and Care Guide. Check Operation of Single and Double Ovens 1. Turn on power. 2. At first use, set up the clock and any other preferences if available. For more information, read the Use and Care Guide. 3. Press BROIL on single oven models. NOTE: Press UPPER BROIL or LOWER BROIL on double oven models. 4. Set the temperature. 5. Press START. If Oven(s) Does Not Operate, Check the Following: ■■ Household fuse is intact and tight, or circuit breaker has not tripped. ■■ Electrical supply is connected. ■■ See "Troubleshooting" section in the Use and Care Guide. 6. When oven has been on for 5 minutes, feel for heat. If you do not feel heat or if an error message appears in the display, turn off the oven and contact a qualified technician. 7. Press UPPER CANCEL/LOWER CANCEL on double ovens, or press CANCEL on single ovens. If You Need Assistance or Service: Please refer to the "Warranty." 15