Jenn-Air JMC6224HL1 Installation Instructions 1 - Page 6

INSTALLATION INSTRUCTIONS Prepare Built-In Microwave Oven 1. Locate existing wiring to avoid drilling into or severing wiring during installation. WARNING Make Electrical Connection WARNING Excessive Weight Hazard Use two or more people to move and install microwave oven. Failure to do so can result in back or other injury. 2. To avoid floor damage, set the microwave oven onto cardboard prior to installation. Do not use handle or any portion of the front frame for lifting. 3. Remove the shipping materials and tape from the microwave oven. 4. Remove and set aside racks and other items from inside the microwave oven. 5. Remove the hardware package from inside the bag containing literature. 6. Move the microwave oven and cardboard close to the microwave oven's final location. Electrical Shock Hazard Disconnect power before servicing. Use 12 gauge copper wire. Electrically ground oven. Failure to follow these instructions can result in death, fire, or electrical shock. The microwave oven is manufactured with a neutral (white) power supply wire and a cabinet-connected yellow-green ground wire. 1. Disconnect power. 2. Feed the flexible conduit from the microwave oven through the opening in the cabinet. 3. Remove junction box cover if it is present. 4. Install a UL listed or CSA approved conduit connector to the junction box. A A. UL listed or CSA approved conduit connector 5. Route the flexible conduit from the microwave oven to the junction box through a UL listed or CSA approved conduit connector. 6. Tighten screws on conduit connector. 7. Complete electrical connection. 6