Jenn-Air JMW3430DB Instruction Sheet - Page 1
Jenn-Air JMW3430DB Manual
View all Jenn-Air JMW3430DB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Using Your Jenn-Air Connected Appliance For future reference, please fill in the following information as you connect your appliance: Home Network Name (SSID Account ID/E-mail Address Home Network Password Appliance SAID Account Password Your Jenn-Air connected appliance is pretty clever. It can notify you when it needs attention through the app to get your attention. To start: Connect your appliance to the internet so it is ready to communicate. On your smart phone, download and install the Jenn-Air Connect application. Jenn-Air Connect is available for the iOS™ and Android™ operating systems. What the different appliance Wi-Fi Icons mean: Before you begin Make sure: ■ Your appliance is an 802.11g device. Please check that your wireless network is compatible. ■ Your Wi-Fi-enabled appliance is properly installed and turned on. ■ Your wireless router is turned on and you have an internet connection. Determine which of the two connection setup methods to use 1. Manual Method: If your wireless router does not support WPS, follow the Manual Method Setup instructions below. 2. Automatic Method: Many wireless routers support a standard for fast and easy connection to wireless devices. Officially known as Wi-Fi Protected Setup (WPS), it features a connection button and indicator light. If yours is like this, follow the preferred Automatic Method Setup instructions below. Connected to the home router and to the Jenn-Air server (Remote Start Disabled) Connected to the home router and to the Jenn-Air server (Remote Start Enabled) Connected to the home router, but not to the Jenn-Air server (not connected to the internet, not claimed) Not Connected to home router (i.e. appliance has the router info, but cannot connect to it) Manual Method Setup: You will need: ■ Your home wireless network name (or SSID number) and your network password. Follow These Steps: 1. On your Wi-Fi-enabled appliance, go to TOOLS > WIRELESS FEATURES> Enable WiFi; then touch OK. 2. Review the Terms of Service contract. If you agree, proceed to step 3; otherwise, the Wi-Fi feature may not be used and you must touch DISAGREE or BACK to return to the previous menu. 3. Touch SEARCH NETWORK. Your appliance will then begin searching for available networks. To scan for a network, go step 4; to manually enter a network, go to step 5. NOTES: ■ T he signal "bars" can change to white or grey to indicate signal strength. All white indicates the best signal. ■ T hese icons will only show if Wi-Fi is enabled. If Wi-Fi is disabled, no icon will show at all. The Jenn-Air Connect application is under continuous improvement. The images and steps within these instructions may slightly vary from the time of publication. To Scan for a Network: 4. Touch to highlight the network you wish to connect to; then touch CONNECT. If your network does not appear, touch SEARCH NETWORK again. If you are attempting to connect to a secured network, you will be prompted to ENTER PASSWORD. Enter your network password and touch CONNECT. NOTE: The home network password is case sensitive. Otherwise, if you are connecting to an unsecured network, the appliance will attempt to make the connection. Proceed to "After Setup." iOS™ is a trademark or registered trademark of Cisco in the U.S. and other countries. Android™ is a trademark of Google Inc. W10787928A To Manually Enter a Network: 5. Once the network begins to search, touch ADD A NETWORK. 6. Using the keypad, enter your network's SSID and touch NEXT. 7. You will be asked to select between WEP, WPA PSK, WPA2 PSK, or OPEN Authentication. Touch the desired authentication type; then touch NEXT. 1