Jenn-Air JS42PPDUDE Dimension Guide - Page 3

Opening/clearance Dimensions

Page 3 highlights

JENN-AIR® DETAILED PLANNING DIMENSIONS 42" SIDE-BY-SIDE REFRIGERATORS WITH DISPENSER JS42PPDUDE - 423⁄8" x 833⁄8" x 273⁄4" (with handles) JS42SSDUDE - 423⁄8" x 833⁄8" x 271⁄8" (with handles) 3 of 3 OPENING/CLEARANCE DIMENSIONS MODEL # JS42PPDUDE JS42SSDUDE in cm e A B A Width (min.) K B Width of recommended electrical location 411⁄2 71⁄2 105.4 19.1 Distance from side of cabinet to C recommended water connection 6 15.2 L M location O D Height (min.) P E Height tNo recommenQded electrical Mlocation R 84 213.4 77 195.6 D E F Depth of recommended water connection location (max.) 1 2.5 110º 110º e Recommended electrical connection location Water Shutoff w Recommended water connection location C FRONT VIEW w C F F ELECTRICAL REQUIREMENTS 115 volt, 60 Hz, AC only, 15- or 20-amp fused, grounded circuit is required. A dedicated circuit is recommended. Use an outlet that cannot be turned off by a switch. MCinimum length of power cord is 84" (213.4 cm). Do not use an extension cordD. WATERE PRESSURE REQUIREMENTS F A cold water Gsupply with water pressure between 30 and 120 psi (207 and 827 kPa) is required to operate the water dispenser and ice maker. Call a licensed, qualified plumber with any questions about the water pressure. Reverse Osmosis Water Supply IMPORTANT: The pressure of the water coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 30 and 120 psi (207 and 827 kPa). If a reverse osmosis water filtration system is connected to the cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 psi (276 to 414 kPa). LOCATION REQUIREMENTS Floor must be able to support refrigerator (more than 600 lb [272 kg]) and contents of the reAfr*igerator and must be at the same level as flooring in the room. B* BACK VIEW IMPORTANT: Dimensional specifications are provided for planning purposes only. Do not make any cutouts based on this information. Refer to the Installation or Use & Care Guide before selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation. All Jenn-Air® appliances are appropriately UL, CUL or CSA approved. 8115AdZw915

  • 1
  • 2
  • 3

JENN-AIR
®
DETAILED PLANNING DIMENSIONS
3 of 3
8115AdZw915
IMPORTANT:
Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information.
Refer to the Installation or Use & Care Guide
before
selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air
®
appliances are appropriately UL, CUL or CSA approved.
OPENING/CLEARANCE DIMENSIONS
BACK VIEW
w
D
A
F
C
C
B
E
e
Water
Shutoff
FRONT VIEW
MODEL #
JS42PPDUDE
JS42SSDUDE
in
cm
A
Width (min.)
41
1
2
105.4
B
Width of recommended electrical
location
7
1
2
19.1
C
Distance from side of cabinet to
recommended water connection
location
6
15.2
D
Height (min.)
84
213.4
E
Height to recommended electrical
location
77
195.6
F
Depth of recommended water
connection location (max.)
1
2.5
e
Recommended electrical connection location
w
Recommended water connection location
ELECTRICAL REQUIREMENTS
115 volt, 60 Hz, AC only, 15- or 20-amp fused, grounded circuit is
required. A dedicated circuit is recommended. Use an outlet that cannot
be turned off by a switch.
Minimum length of power cord is 84" (213.4 cm). Do not use an extension
cord.
WATER PRESSURE REQUIREMENTS
A cold water supply with water pressure between 30 and 120 psi (207 and
827 kPa) is required to operate the water dispenser and ice maker. Call a
licensed, qualified plumber with any questions about the water pressure.
Reverse Osmosis Water Supply
IMPORTANT:
The pressure of the water coming out of a reverse osmosis
system going to the water inlet valve of the refrigerator needs to be
between 30 and 120 psi (207 and 827 kPa).
If a reverse osmosis water filtration system is connected to the cold water
supply, the water pressure to the reverse osmosis system needs to be a
minimum of 40 to 60 psi (276 to 414 kPa).
LOCATION REQUIREMENTS
Floor must be able to support refrigerator (more than 600 lb [272 kg])
and contents of the refrigerator and must be at the same level as flooring
in the room.
42" SIDE-BY-SIDE REFRIGERATORS WITH DISPENSER
JS42PPDUDE – 42
3
8
" x 83
3
8
" x 27
3
4
"
(with handles)
JS42SSDUDE – 42
3
8
" x 83
3
8
" x 27
1
8
"
(with handles)