Jenn-Air JS48PPDUDB Dimension Guide - Page 3
Opening/clearance Dimensions - 20
View all Jenn-Air JS48PPDUDB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
JENN-AIR® DETAILED PLANNING DIMENSIONS 48" Pro-Style® Side-By-Side Refrigerator With Dispenser JS48PPDUDB - 481⁄8" x 83" x 273⁄4" 3 of 3 OPENING/CLEARANCE DIMENSIONS MODEL # A Width (min.) JS48PPDUDB in cm 471⁄2 120.7 e A B B Width of recommended electrical location C Distance from side of cabinet to recommended water connection location D Height (min.) 4 10.2 6 15.2 831⁄2 212.1 E Height to recommended electrical location K F Depth of recommended water connection location (max.) 77 195.6 1 2.5 D E e Recommended electrical connection location O w Recommended water connection lPocation L N Q MELECTRICAL REQUIREMMENTS R 115 volt, 60 Hz, AC only, 15- or 20-amp fused, grounded circuit is required. Water Shutoff A dedicated circuit is recommended. Use an outlet that cannot be turned off 1b1y0aºswitch. 110º Minimum length of power cord is 84" (213.4 cm). Do not use an extension cord. WATER PRESSURE REQUIREMENTS A cold water supply with water pressure between 30 and 120 psi (207 and 827 kPa) is required to operate the water dispenser and ice maker. Call a licensed, qualified plumber with any questions about the water pressure. C FRONT VIEW E F w C F Reverse Osmosis Water Supply IMPORTANT: The pressure of the water coming out of a reverse osmosis system going to the water inClet valve of the refrigerator needs to be between 30 and 120 psi (207 and 827 kDPa). If a reverse osmosis water fiEltration system is connected to the cold water supply, the water pressure to the reveFrse osmosis system needs to be a minimum of 40 to 60 psi (276 to 414 kPa). G LOCATION REQUIREMENTS Floor must be able to support refrigerator (more than 600 lb [272 kg]) and contents of the refrigerator and must be at the same level as flooring in the room. G H I Wall A* B* J Floor Back VIEW Product dimension, cutout and installation specifications are provided for planning purposes only. Before installing any product, be sure to verify cutout dimensions and electrical/gas connections as actual product dimensions may vary. JRC120078 03/2012