Jenn-Air JSC24C8EAM Use and Care - Page 5

Adjusting the Controls For your convenience, your refrigerator and freezer controls are preset at the factory. When you first install your refrigerator, make sure that the controls are still set to the "mid-settings." The factory recommended set points are 37°F (3°C) for the refrigerator and 0°F (-18°C) for the freezer. IMPORTANT: ■ Wait 24 hours before you put food into the refrigerator. If you add food before the refrigerator has cooled completely, your food may spoil. NOTE: Adjusting the set points to a colder than recommended setting will not cool the compartments any faster. ■ If the temperature is too warm or too cold in the refrigerator or freezer, first check the air vents to be sure they are not blocked before adjusting the controls. ■ The preset settings should be correct for normal household usage. The controls are set correctly when milk or juice is as cold as you like and when ice cream is firm. ■ Wait at least 24 hours between adjustments. Recheck the temperatures before other adjustments are made. To view and adjust the set points, press and hold the TEMP button for 3 seconds. When adjust mode is activated, adjusting information will appear on the display screen. NOTE: To view Celsius temperatures, press the OPTIONS button when adjust mode is activated. To return the display setting to Fahrenheit, press OPTIONS again. ■ When adjust mode is activated, the display screen shows the refrigerator set point and "FRIDGE" appears. ■ Press the SELECT arrows to raise or lower the set point. ■ When you have finished viewing (and adjusting if desired) the refrigerator set point, press TEMP to change the display to show the freezer set point. When the zone has been changed, "FREEZER" appears on the display screen. ■ Press the SELECT arrows to raise or lower the set point. ■ When you have finished viewing (and adjusting if desired) both the refrigerator and freezer set points, press LIGHT to save the settings. NOTE: To exit without saving changes, allow about 60 seconds of inactivity and adjust mode will turn off automatically. When adjusting temperature set points, use the following chart as a guide. CONDITION: TEMPERATURE ADJUSTMENT: REFRIGERATOR too cold REFRIGERATOR Setting 1° higher REFRIGERATOR too warm REFRIGERATOR Setting 1° lower FREEZER too cold FREEZER Setting 1° higher FREEZER too warm / Too little ice FREEZER Setting 1° lower The set point range for the refrigerator is 33°F to 45°F (0°C to 7°C). The set point range for the freezer is -5°F to 5°F (-21°C to -15°C). Cooling On/Off Your refrigerator and freezer will not cool when cooling is turned off. ■ To turn cooling off, press and hold the OPTIONS and FILTER buttons at the same time for 3 seconds. IMPORTANT: To avoid unintentionally locking the dispenser or changing other settings, be sure to press both buttons at exactly the same time. When cooling is off, "COOLING OFF" will appear on the display screen. ■ Press and hold OPTIONS and FILTER for 3 seconds again to turn cooling back on. Additional Features Speed Ice and Max Cold The Speed Ice feature assists with temporary periods of heavy ice use by increasing ice production over a 24-hour period. The Max Cold feature assists with periods of heavy ice usage, full grocery loads, or temporarily warm room temperatures. ■ To turn on the Speed Ice feature, press OPTIONS. "Speed Ice" will appear on the display screen. The Speed Ice feature will remain on for 24 hours unless manually turned off. ■ To turn on the Max Cold feature, press OPTIONS a second time. The Speed Ice feature will turn off, and the Max Cold feature will turn on. "Max Cold" will appear on the display screen. The Max Cold feature will remain on for 24 hours unless manually turned off. ■ To turn on both the Speed Ice and Max Cold features at the same time, press OPTIONS a third time. Both "Speed Ice" and "Max Cold" will appear on the display screen. Both features will remain on for 24 hours unless manually turned off. ■ To turn both features off, press OPTIONS a fourth time. Both "Speed Ice" and "Max Cold" will disappear from the display screen. When Speed Ice and/or Max Cold are active, the temperature displays will not change. After 24 hours, the refrigerator returns to the previous temperature set points. NOTE: If increased ice production is desired at all times, change the freezer control to a lower setting. Setting the freezer to a colder temperature may make some foods, such as ice cream, harder. 5