Jenn-Air JURFL242HL Dimension Guide - Page 6

UNDER COUNTER solid door Refrigerator DETAILED PLANNING DIMENSIONS GUIDE JURFR242HL, JURFL242HL, JURFR242HM, JURFL242HM, JURFL242HX, JURFR242HX 237/8" (W) x 343/8" (H) x 231/16" (Depth without door panels/handles) WOOD PANEL GUIDE CAUTION Pinch Hazard Installation of door panels with less than a ³⁄₈" (0.95 cm) gap between the door panel and the adjacent cabinet increases the risk of potential pinching. IMPORTANT:  The graphics in following sections show a custom panel for a door with the hinges installed on the right-hand side. If your refrigerator has the hinges installed on the left-hand side, rotate the custom frame 180° so the hinge markings will be on the left.  Panel dimensions shown are the minimum size to cover the appliance door. Panels can be made taller/ wider to match surrounding cabinetry.  The recommended thickness of the overlay panel is 3/4" (19 mm).  Custom solid door overlay panel must not weigh more than 20 lbs (9.07 kg).  Custom glass door overlay panel must not weigh more than 10 lbs (4.54 kg).  Overlay panels weighing more than recommended may cause damage to your appliance. SOLID DOOR OVERLAY PANEL 1/4" (7 mm) 1/8" (3 mm) (125 mm) 1/2" (12 mm) 2" (53 mm) (60.3 cm) (77.75 cm) Solid door overlay panel and hinge routing dimensions W11356584A 08-Aug-2019 11:33:47 EDT | RELEASED ®/™ ©2019 JennAir. All rights In some European factories reserved. the letter "W" of the part code mentioned herein will be au0t8o/1m9 atically replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")