Jensen BT1611I Quick Start Guide

Need help?

For technical assistance, call

the Audiovox customer

support line at 1-800-323-4815.

Phase Linear BT1611i Receiver Quick Start Guide

CHASSIS GROUND

Connect the red wire to the factory

Accessory or Ignition wire, which

receives power when the key is

turned on.

ACCESSORY

POWER ANTENNA/

REMOTE AMP TURN ON LEAD

Positive (+) 12VDC output when the head

unit is turned on. Connect the blue wire to

a motorized antenna or to an amplifier.

BATTERY

RCA OUTPUT

Connect to an

optional amplifier.

ANTENNA CONNECTOR

Connect to the factory or aftermarket antenna lead.

(Optional extensions or adapters may be necessary

depending on the type of vehicle you have.)

)

-

()

(

+

Connect the black wire to the factory ground wire. If a

factory ground wire is not provided, locate a clean,

unpainted metal part of the dash and secure the ground

wire with a "ring" terminal and a sheet metal screw.

Connect the yellow wire to the battery

or 12 volt power source that is always

live.

This wire MUST be connected

for the radio to work.

AMP

IMPORTANT: Incorrect wiring connections

can damage the unit. Follow the wiring

instructions carefully, or have the

installation handled by an experienced

technician.

AUXILIARY

INPUT

SUBWOOFER

OUTPUT

15

SPEAKERS

Left Front

Right Front

Left Rear

Right Rear

+

green

-

green/black

+

purple

-

purple/black

+

white

-

white/black

+

gray

-

gray/black

Printed in China

iPod Nano

iPod Mini

iPod

iPod Gen5

jLINK iPod CABLE

Jensen BT1611I Quick Start Guide

Jensen BT1611I - Phase Linear Radio Manual

Jensen BT1611I manual content summary: