Jensen BT1611I Quick Start Guide - Page 1
Jensen BT1611I - Phase Linear Radio Manual
UPC - 043258304155
View all Jensen BT1611I manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Phase Linear BT1611i Receiver Quick Start Guide + + - - 15 () (+) IMPORTANT: Incorrect wiring connections can damage the unit. Follow the wiring instructions carefully, or have the installation handled by an experienced technician. BATTERY Connect the yellow wire to the battery or 12 volt power source that is always live. This wire MUST be connected for the radio to work. CHASSIS GROUND Connect the black wire to the factory ground wire. If a factory ground wire is not provided, locate a clean, unpainted metal part of the dash and secure the ground wire with a "ring" terminal and a sheet metal screw. ANTENNA CONNECTOR Connect to the factory or aftermarket antenna lead. (Optional extensions or adapters may be necessary depending on the type of vehicle you have.) AUXILIARY INPUT SUBWOOFER OUTPUT Need help? For technical assistance, call the Audiovox customer support line at 1-800-323-4815. POWER ANTENNA/ REMOTE AMP TURN ON LEAD Positive (+) 12VDC output when the head unit is turned on. Connect the blue wire to a motorized antenna or to an amplifier. RCA OUTPUT Connect to an optional amplifier. AMP ACCESSORY Connect the red wire to the factory Accessory or Ignition wire, which receives power when the key is turned on. jLINK iPod CABLE Left Front - white/black + white gray/black gray Right Front Left Rear - green/black purple/black + green purple SPEAKERS Right Rear Printed in China iPod Gen5 iPod iPod Mini iPod Nano