Jensen MPX6411 Quick Start Guide - Page 1

MPX6411 Receiver Quick Start Guide XM® DIRECT CONNECT CABLE IMPORTANT: Incorrect wiring connections can damage the unit. Follow the wiring instructions carefully, or have the installation handled by an experienced technician. XM® AUDIO INPUT () (+) - BATTERY Connect the yellow wire to the battery or 12 volt power source that is always live. This wire MUST be connected for the radio to work. 15A ANTENNA JACK Connect to the factory or aftermarket antenna lead. (Optional extensions or adapters may be necessary depending on the type of vehicle you have). SUBWOOFER OUTPUT TERK XMDJEN100 CABLES SOLD SEPARATELY TERK XMD100 DIRECT TUNER (sold separately) CHASSIS GROUND Connect the black wire to the factory ground wire. If a factory ground wire is not provided, locate a clean, unpainted metal part of the dash and secure the ground wire with a "ring" terminal and a sheet metal screw. POWER ANTENNA/ REMOTE AMP TURN ON LEAD Positive (+) 12VDC output when the head unit is turned on. Connect the blue wire to a motorized antenna or to an amplifier. AMP AMP TERK ANTENNA (sold separately) RCA OUTPUT Connect to an optional amplifier. ACCESSORY Connect the red wire to the factory Accessory or Ignition wire, which receives power when the key is turned on. AUXILIARY INPUT Left Front Left Rear Right Front Right Rear SPEAKERS Need help? For technical assistance, call the Jensen customer support line at 1-800-323-4815. jPORT/ CD CHANGER CONNECTOR (sold separately) See other side for jPORT connection options.