Jensen VM9212N Operation Manual - Page 5

VM9212N PREPARATION Congratulations on your purchase of the Jensen VM9212N Mobile Multimedia Receiver. It's a good idea to read all of the instructions before beginning the installation. We recommend having your Jensen VM9212N installed by a reputable installation shop. Features DVD • Aspect Ratio - Full and Normal • Fast Forward - 2X, 4X, 8X and 32X • Slow Motion - 1/2, 1/4, 1/6 and 1/7 • Play, Pause, Stop, Next Chapter and Previous Chapter CD / MP3 / WMA • CD-Text Compatible • ID3 Tag Compatible • Directory Search (MP3 / WMA Only) • Direct Track Access via Remote Control • Burn up to 1500 MP3 and WMA Files onto a DVD+R / RW • Audible Forward / Reverse Track Search (CD-DA Only) • Random, Repeat and Intro • Play, Pause, Stop, Next Track and Previous Track Tuner • USA / Europe Frequency Spacing • 30 Station Presets (18 FM / 12 AM) • Auto Stereo / Mono • Auto Store Chassis • 1.0 DIN (Import / ISO-DIN Mountable) • Motorized Flip-Out / Flip-Up LCD Screen • 8 Character / Segment Type Secondary LCD Display • 7" TFT Active Matrix LCD w/ Anti-Glare Coating • 336,960 Sub Pixels (1440W X 234H) • Pixel Pitch - 0.321W X 0.370H • Screen Tilt / Angle Adjustment • Beep Tone Confirmation (On-OFF Option) • Heat Management System - Forced Air Cooling to keep the chip sets operating at nominal temperatures General • 44-Key Infrared Remote Control • Two Composite Video Outputs for Additional Screens • Two Audio / Video Auxiliary Inputs for Game Console, Camcorder, Navigation, etc. • Navigation Ready (Nav101 Only) • Three-Band Tone control (Bass, Mid and Treble) w/ Eight Preset EQ Curves • Front, Rear and Subwoofer Line Output • Subwoofer Phase Control - 0 ~ 180 degrees • Programmable Volume Control • Rear Camera Input (Normal and Mirror Image View) • Touch Screen Calibration Mode • 100-Ohm Preamp Line Output - All Audio Channels • 2VRMS Line Output - All Channels • Rotary Encoder Audio Control • 5-Way Joystick • RCA Audio / Video Input • SWC Interface - Compatible with PAC adapter SWI-PS Steering Wheel Control Interface, sold separately Optional Equipment NAV101 • The VM9212N is "navigation ready." Before accessing any navigation features, you must purchase and install the NAV101 module. All installation and operating instructions will be included with the NAV101 navigation module. • Once the NAV101 is connected and operating properly, the NAV source mode will become active. While the NAV101 is not installed, the NAV option appears gray, indicating the function is not available. WARNING! Only connect the unit to a12-volt power supply with proper grounding. WARNING! Never install this unit where operation and viewing could interfere with safe driving conditions. WARNING! To reduce the risk of a traffic accident (except when using for rear view video camera) never use the video display function while driving the vehicle. This is a violation of federal law. WARNING! Never disassemble or adjust the unit. WARNING! To prevent injury from shock or fire, never expose this unit to moisture or water. WARNING! Never use irregular discs. WARNING! To prevent damage to the mechanism inside this unit, avoid impact to the TFT monitor. WARNING! Using an improper fuse may cause damage to the unit and result in a fire. WARNING! The monitor employs an automatic motorized mechanism. To prevent damage to the core mechanism, please do not push, pull or swivel the monitor manually. 1