Karcher BR 30/4 C Operating instructions 2 - Page 2

Operation, Finish operation

Page 2 highlights

QUICKSTART Operation 1A B C D 2A B Finish operation 1A B C D Normal soiling ƽ Danger Risk of injury on account of electric shock caused by a damaged mains cable. Do not let the mains cable come in contact with the rotating brushes. Caution Risk of damage to the floor covering. The cleaning method for severe soiling must only be used on floors suitable for this kind of cleaning. Risk of damage to the fresh water pump if it runs dry because of empty fresh water reservoir. Monitor the fill level indicator and switch the water pump switch off if the fresh water reservoir is empty. A Bring the vacuum bar lifting pedal into the "vacuuming" position. B Press the park position release and swivel the handle toward the rear. C Set main switch for brush/vacuum operation to "1". D Activate the water pump switch. Move the appliance over the surface to be cleaned. Severe soiling Caution Risk of damage to the floor covering. The cleaning method for severe soiling must only be used on floors suitable for this kind of cleaning. A Set the vacuum bar lifting pedal to the "not vacuuming" position and perform cleaning as with normal soiling. The detergent liquid remains on the surface to be cleaned and has time to react B Move the vacuum bar lift pedal to position "suction off" and reclean the surface. Complete cleaning A Turn off the water pump switch. Push the appliance a little further to vacuum up the remaining water. B Set main switch for brush/vacuum operation to "0". C Swivel the appliance handle forward and arrest in the park position. D Pull out the mains plug. 5.964-028.0 11/12

  • 1
  • 2
  • 3
  • 4

QUICKSTART
5.964-028.0 11/12
Operation
1
A
C
B
D
Normal soiling
±
Danger
Risk of injury on account of electric shock caused
by a damaged mains cable. Do not let the mains
cable come in contact with the rotating brushes.
Caution
Risk of damage to the floor covering.
The cleaning method for severe soiling must only
be used on floors suitable for this kind of
cleaning.
Risk of damage to the fresh water pump if it runs
dry because of empty fresh water reservoir.
Monitor the fill level indicator and switch the water
pump switch off if the fresh water reservoir is
empty.
A
Bring the vacuum bar lifting pedal into the
"vacuuming" position.
B
Press the park position release and swivel
the handle toward the rear.
C
Set main switch for brush/vacuum operation
to “1”.
D
Activate the water pump switch.
Move the appliance over the surface to be
cleaned.
2
A
B
Severe soiling
Caution
Risk of damage to the floor covering. The clean-
ing method for severe soiling must only be used
on floors suitable for this kind of cleaning.
A
Set the vacuum bar lifting pedal to the "not
vacuuming" position and perform cleaning as
with normal soiling.
The detergent liquid remains on the surface
to be cleaned and has time to react
B
Move the vacuum bar lift pedal to position
"suction off" and reclean the surface.
Finish operation
1
A
D
B
C
Complete cleaning
A
Turn off the water pump switch.
Push the appliance a little further to
vacuum up the remaining water.
B
Set main switch for brush/vacuum
operation to “0”.
C
Swivel the appliance handle forward
and arrest in the park position.
D
Pull out the mains plug.