Karcher BRS 43/500 C Operating instructions 2 - Page 11

Machine Operation, Pre-Run, Inspection, Starting Machine - carpet cleaner

Get Karcher BRS 43/500 C PDF manuals and user guides View all Karcher BRS 43/500 C manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

Machine Operation Pre-Run Inspection Perform a pre-run inspection to find possible problems that could cause poor performance or lost time from breakdown. Check the rating plate to confirm voltage and frequency is the same as the power supply. NOTE: A 10% variation in voltage is acceptable. Starting Machine NOTE: Perform pre-run machine check before operating machine. FOR SAFETY: Before starting machine, make sure that all covers are in place and secured properly. 1. Connect the machine to a power supply. 2. Release the handle lock. 3. Set black on/off switch to "on" position. 4. Press green button to start brushes. After applying a light spray of diluted interim carpet cleaner onto the carpet using a pressurized tank sprayer, commence cleaning by pushing and pulling the machine slowly over the wetted carpet. Operations Starting Machine NOTE: Perform pre-run machine check before operating machine. FOR SAFETY: Before starting machine, make sure that all covers are in place and secured properly. 1. Connect the machine to a power supply. 2. Release the handle lock. 3. Set black on/off switch to "on" position. 4. Press green button to start brushes. 5. Press and hold blue button to spray chemical. Once machine is plugged in spray function is operational. Apply a light spray of diluted interim carpet cleaner onto the carpet using the onboard spraying system. Spray chemical while pushing the machine forward. Brush the chemical into the carpet while pulling the machine slowly over the wetted carpet. Move the machine in multiple directions and overlapping strokes. Flammable materials can cause an explosion or fire. Do not use flammable materials with this machine. 86338690 BRS 43/500 C 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
86338690 BRS 43/500 C
11
Operations
Machine Operation
Pre-Run
Inspection
Perform a pre-run inspection to find possible problems
that could cause poor performance or lost time from
breakdown. Check the rating plate to confirm voltage
and frequency is the same as the power supply. NOTE:
A 10% variation in voltage is acceptable.
Starting Machine
NOTE:
Perform pre-run machine check before
operating machine.
FOR SAFETY:
Before starting machine, make sure
that all covers are in place and secured properly.
1.
Connect the machine to a power supply.
2.
Release the handle lock.
3.
Set black on/off switch to "on" position.
4.
Press green button to start brushes.
After applying a light spray of diluted interim carpet
cleaner onto the carpet using a pressurized tank
sprayer, commence cleaning by pushing and pulling
the machine slowly over the wetted carpet.
Starting Machine
NOTE:
Perform pre-run machine check before
operating machine.
FOR SAFETY:
Before starting machine, make sure
that all covers are in place and secured properly.
1.
Connect the machine to a power supply.
2.
Release the handle lock.
3.
Set black on/off switch to "on" position.
4.
Press green button to start brushes.
5.
Press and hold blue button to spray chemical.
Once machine is plugged in spray function is oper-
ational.
Apply a light spray of diluted interim carpet cleaner onto
the carpet using the onboard spraying system.
Spray
chemical while pushing the machine forward.
Brush
the chemical into the carpet while pulling the machine
slowly over the wetted carpet.
Move the machine in
multiple directions and overlapping strokes.
Flammable materials can cause an explosion or fire.
Do not use flammable materials with this machine.