Karcher HDS 6/14 CX Product information - Page 13

ACCESSORIES FOR HDS 6/14 CX 1.169-905.0 141 142 143-145 146 147 148 150 151 152 153 154 Order no. Description ADD ON KITS Attachment kit for transport Crane loading attachment kit for HDS compact 141 2.642-638.0 Effortless loading by crane.  class Flame monitoring attachment kit Flame monitoring attachment kit for HDS 142 2.642-711.0 A light sensor monitors the burner flame. The fuel supply is shut off if the flame goes out.  Compact Class WATER CONNECTION Geka coupling Geka connector with hose barb, R 1/2" 143 6.388-461.0 with hose liner  Geka connector with hose barb, R 3/4" 144 6.388-455.0  Geka connector with hose barb, R 1" 145 6.388-465.0 with hose barb  Geka connector with internal thread, R 1" 146 6.388-458.0 with female thread  Suction filter Water suction filter 147 6.414-956.0 Suitable for ponds, storage tanks or similar, polyamide filter casing, stainless steel strainer, 800 μm  mesh, R 3/4" and R 1" connection, without non-return valve Suction filter with check valve 148 4.730-012.0 Brass suction filter suitable for ponds, storage tanks, etc. With check valve.  Water fine filter Universal water fine filter, 25 μm 149 2.637-020.0 Water fine filter, mesh size 25 μm, max. temperature 50 °C. Protects the machine from small dirt  particles in the water. Water volume up to 1200 l/h. 3/4" connection, with 1" adapter. Water fine filter, with adapter 150 4.730-102.0 Fine-mesh water filter, 125 μm, max. temperature 50°C. Protects the high-pressure cleaner from  dirt particles contained in the water. Water flow rate up to 1200 l/h. Connection 3/4", with adapter, 1". Water fine filter, 100 μm, R 1" 151 2.638-270.0 Fine-mesh water filter, 100 μm, max. temperature 60°C. Connects to high-pressure cleaner. Protects  the high-pressure cleaner from dirt particles contained in the water. Water flow rate up to 1200 l/h. Connector 1". Water supply hose Water supply hose 152 4.440-038.0 NW 13 R1" / R 3/4", up to 30 °C  153 4.440-207.0 NW 19 R1" / R 3/4", up to 85 °C, for pick-up  Backflow check valve Backflow preventer 154 2.641-374.0 To prevent detergent getting into the drinking water cycle in case of inlet at low-pressure.  - hot water resistant up to 80 °C - tested according to IEC 60335-2-79 - integrated leakage protection  Available accessories. HDS 6/14 CX, 1.169-905.0, 2022-11-02