Karcher NT 65/2 Ap Operating instructions 2 - Page 10

Contents General notes 10 Environmental protection 10 Intended use 10 Description of the device 10 Preparation 10 Initial startup 10 Operation 11 Transport 11 Storage 11 Care and service 11 Troubleshooting guide 12 Warranty 12 Accessories and spare parts 12 EU Declaration of Conformity 12 Technical data 13 General notes Read these original instructions and the enclosed safety instructions before using the device for the first time. Act in accordance with them. Keep both books for future reference or for future owners.  If the operating instructions and safety instructions are not observed, the device can be damaged and dangers could arise for users and other persons.  Notify the dealer immediately in the case of shipping damage.  Check the package contents when unpacking for missing accessories or for damage. Environmental protection The packing materials can be recycled. Please dispose of packaging in accordance with the environmental regulations. Electrical and electronic appliances contain valuable, recyclable materials and often components such as batteries, rechargeable batteries or oil, which - if handled or disposed of incorrectly - can pose a potential threat to human health and the environment. However, these components are required for the correct operation of the appliance. Appliances marked by this symbol are not allowed to be disposed of together with the household rubbish. Notes on the content materials (REACH) Current information on content materials can be found at: www.kaercher.com/REACH Intended use ṇ WARNING Health risk Inhalation of dusts that are harmful to health Do not use the device for vacuuming up dusts that are harmful to health.  This vacuum cleaner is intended for the wet and dry cleaning of floor and wall surfaces.  This device is suitable for commercial use, e.g. in hotels, schools, hospitals, factories, shops, offices, and rental companies. Description of the device Illustration A 1 Electrodes 2 Suction hose 3 Push handle 4 Suction head lock 5 Dirt receptacle 6 Removing the 7 Steering roller 8 Suction hose port 9 Steering roller bracket (NT 65/2 only) 10 Floor nozzle 11 Suction pipe 12 Main switch 13 Carrying handle 14 Filter cover 15 Filter dedusting button 16 Hose holder 17 Angle piece 18 Drain hose 19 Rest for floor nozzle 20 Suction pipe holder 21 Mains cable 22 Holder for crevice nozzle 23 Cable clips 24 Type plate 25 Filter dedusting 26 Flat fold filter 27 Tilting chassis (NT 75/2 only) 28 Container handle (NT 75/2 only) Colour coding  Control elements for the cleaning process are yellow.  Control elements for maintenance and servicing are light grey. Preparation 1. Unpack the device and install the accessories. Illustration B Initial startup ATTENTION Danger due to fine dust entering Risk of damage to the suction motor. Never remove the flat fold filter when vacuuming. 10 English