Kenmore 1694 Use and Care Guide - Page 12
Cause, Correction
View all Kenmore 1694 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
PROBLEM CAUSE CORRECTION BOUND AND NOIBE (Cont.) Popping or cracking sound when compressor comes on. o Metal parts undergo expansion and contraction, as in hot water pipes. ,, This is normal. Sound will level off or disappear as freezer continues to run. Bubbling or gurgling sound, like water boUing, ,, Refrigerant (used to cool freezer) is circulating throughout the system. ,, This is normal. Vibrating or rattling noise. ,, Freezer is not ievel. It rocks on the floor when it is moved slightly. ,, Ftoor is uneven or weak. Freezer rocks on floor when it is moved sIightly. ,, Freezer is touching the wail. ,, Level the unit. Refer to "Leveling" in the First Steps Section. ,, Ensure floor can adequately support freezer. Leve! the freezer by putting wood or metal shims under part of the freezer. ,, Relevel the freezer or move freezer slightly. Refer to "Leveling" in the First Steps Section. WATER/MOIBTURE/FROBT INBIDE FREEZER Moisture forms on inside freezer wails, WATER/MOISTURE/FROST ,, Weather is hot and humid, which increases internal rate of frost build-up. ,, Door may not be seating properly. ,, Door is kept open too !ong, or is opened too frequently. ,, This is normal ,, See "DOOR PROBLEMS" Section. ,, Open the door less often. OUTBIDE FREEZER Moisture forms on ouside of freezer, ,, Door may not be seating properly, causing the cold air from inside the freezer to meet warm moist air from outside. ,, See "DOOR PROBLEMS" Section. ODOR IN FREEZER Odors in freezer DOOR PROBLEMS _ ,, Interior needs to be cleaned. l,, Foods with strong odors are in the freezer. ,, Clean interior with sponge, warm water, and baking soda. ,, Cover the food tightly. Door will not close. LIGHT BULB iS NOT ON ,, Freezer is not level. It rocks on the floor when it is moved slightly. ,, Floor is uneven or weak. Freezer rocks on floor when it is moved slightly. ,, This condition can force the cabinet out of square and misalign the door. Refer to "Leveling" in the First Steps Section. ,, Level the floor by using wood or metal shims under the freezer or brace floor supporting the freezer. Light bumb is not on. ,, Light butb is burned out. ,, No electric current is reaching the freezer. ,, Follow directions under "hterior Light" in the Freezer Features Section. ,, See "FREEZER DOES NOT RUN" Section. AUTOMATIC ICE MAKER NOT WORKING Automatic ice maker not working. (some modems) , Ensure the Wire Signal Arm is not in the UP position. ,, Ice maker should produce 4 to 5 pounds of ice in a 24 hour period. Water supply is turned off. , Water pressure is too low. o The freezer is not cold enough. 12